|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-03-2011, 11:23 AM | #1 |
Not Yet Wild
Join Date: Oct 2010
Location: Ma
Posts: 25
|
My 84 just melted a wire
I never had a problem at all with this cart one bit. Now today i took it out just to go to church about 1/4 mile away. I got there and had really bad smell coming from it. I lifted the seat and under it where the wire comes from the Forward Reverse module to the selenoid was melted right at the selenoid. The selenoid is cool, but the post was really hot and melted about 3 inches of insulation right at the nut.
Now no other part is bad, and as I said the wire remained cool, and the selonoid body also remained cool. So what is wrong?. Do I have to replace the sel? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-03-2011, 11:27 AM | #2 |
just leave me alone
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
Re: My 84 just melted a wire
Probably a loose or rusted connection, at 300-400 amps these are big welders if anything gets loose or corrodes !
|
04-03-2011, 12:43 PM | #3 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: My 84 just melted a wire
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
5TH speed resistor has a burned mark on resistor board and melted the wire | Electric EZGO | |||
melted the wire off my f/r switch! | Electric EZGO | |||
melted ground wire | Electric EZGO | |||
Melted F2 wire? | Electric EZGO | |||
melted 4 guage wire | Electric EZGO |