|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-20-2011, 05:28 PM | #1 |
Not Yet Wild
Join Date: May 2010
Location: Elgin Il.
Posts: 28
|
loose motor stud
I have a 96 ezgo txt dcs.
The problem is this one of the studs on the motor is loose. the cart still moves but when I step on the accelorator I get a glow under the cart. Can the stud be changed or welded back to the motor??? Any help will be great.... Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-20-2011, 05:55 PM | #2 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: loose motor stud
You'll have to either take the motor apart and repair it or send it out and have it repaired.
|
07-20-2011, 06:00 PM | #3 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: loose motor stud
Don't drive it like that, or you will have a FIRE at some point, get it fixed before you drive it again
|
07-20-2011, 06:04 PM | #4 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: loose motor stud
Keep driving it and you can quaddruple squared your cost of repairs.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Motor stud issues and benifical hindsight | Electric Club Car | |||
Loose motor stud | Electric EZGO | |||
4 Stud to 5 Stud Adaptors / Hubs | Design Center | |||
1993 gas ezgo loose wire on motor | Gas EZGO | |||
Spinning Motor S1 stud | Electric Club Car |