|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-29-2011, 02:35 PM | #11 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: dcs voltage drop when tow/run switch on run
Quick question...does the voltage only drop at the solenoid or does it drop through the battery pack as well?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-29-2011, 02:57 PM | #12 |
Not Yet Wild
Join Date: Aug 2011
Posts: 9
|
Re: dcs voltage drop when tow/run switch on run
It drops on both. Then I can move the meter and watch both come back up really slowly. When they get back up to around 15 volts, they basically stop moving. When I put the switch back to tow, the battery voltage goes right back up. That's what blows my mind. Where does the voltage go?
|
08-29-2011, 03:13 PM | #13 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: dcs voltage drop when tow/run switch on run
There is a slight draw in 'run'. You are playing with dead batteries so any minimal amperage draw is knocking them down, when you stop the tiny draw the surface charge returns but it is not a true charge backed up by lots of amperage stored which is why it so easily reduced.
|
08-29-2011, 05:17 PM | #14 |
Not Yet Wild
Join Date: Aug 2011
Posts: 9
|
Re: dcs voltage drop when tow/run switch on run
Makes sense. Well it's starting to. Thanks so much for all the help. I really appreciate it as I am just learning. I'm giving them a good charge now and after that, I'm gonna try the troubleshooting stuff again. Hopefully I can get on it a little tonight after I get home from a meeting.
|
08-30-2011, 07:50 AM | #15 |
Gone Wild
Join Date: Apr 2010
Location: West Tennessee
Posts: 1,269
|
Re: dcs voltage drop when tow/run switch on run
Load test your batteries individually, sounds like they wont take a load?
|
08-30-2011, 11:21 AM | #16 |
Not Yet Wild
Join Date: Aug 2011
Posts: 9
|
Re: dcs voltage drop when tow/run switch on run
Definitely battery issue as of now. I'm going to finish charging them after work and hopefully by Thursday be able to spend a little time with the volt meter troubleshooting stuff
|
08-30-2011, 12:37 PM | #17 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: dcs voltage drop when tow/run switch on run
You can't test much without a good battery pack. Maybe check some continuity?
|
08-30-2011, 02:04 PM | #18 |
Not Yet Wild
Join Date: Aug 2011
Posts: 9
|
Re: dcs voltage drop when tow/run switch on run
10-4. I'm gonna get them charged on up and check it out. I had 34 volts after the first charge last night and just checked the ignition and I had voltage there finally. So I'm gonna get them charged all the way and try it again.
|
Tags |
dcs, tow/run, voltage drop |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Voltage drop under load | Electric EZGO | |||
Voltage drop at charger? | Electric Club Car | |||
Voltage drop??? | Electric Club Car | |||
voltage drop | Electric Yamaha | |||
What kind of voltage drop would be a problem | Electric EZGO |