|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-04-2007, 08:59 AM | #41 |
The Overposter!
Join Date: Nov 2007
Location: Dixie
Posts: 1,586
|
Re: Rocker panels and brush guard...Not a happy camper.
i bought a rear clutch from bu and it worked good for a month, then one day as a i was driving along (the cart in my avatar) wide open and it blew outer plate into 7 peices and knocked a small hole in my exhaust, and i had to get a exhaust as well as a new rear clutch.
im glad it happened though because i ended up getting the plowmans exhaust for the g16 and also learned never to buy anything from bu again. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-04-2007, 02:11 PM | #42 |
Gone Wild
Join Date: Aug 2007
Location: Yukon, OK
Posts: 234
|
Re: Rocker panels and brush guard...Not a happy camper.
You got lucky, I'm out $330 on a new input shaft, Well at least ill be able to have some fun in the snow when it comes!
|
02-10-2008, 11:44 PM | #43 |
Not Yet Wild
Join Date: Feb 2008
Posts: 25
|
Re: Rocker panels and brush guard...Not a happy camper.
I wish I had read this post before I bought a radio console for my g16 from BU. I redesigned it to fit snug to the top.The way the directions wanted to mount it would have left a 2" gap between the console and the top. I just dont think i should have to modify a new part to make it fit. The pictures on the website are very misleading..........
|
02-11-2008, 09:37 AM | #44 |
Gone Wild
Join Date: Dec 2007
Posts: 160
|
Re: Rocker panels and brush guard...Not a happy camper.
You folks are looking at the negative, I have BU rocker panels and the engine cover. The engine cover does not fit real good but I thought that was by desighn so the motor would get more air and breath better. And the rocker panels are a little thin, easy to bend back in shape plus add very little weight so you can go faster. Got to think positive! LOL
|
02-19-2008, 02:45 PM | #45 |
Not Yet Wild
Join Date: Feb 2008
Posts: 16
|
Re: Rocker panels and brush guard...Not a happy camper.
The one and only items I got from BU sucked ***. Cheap materials and poorly made. WIsh I found you guys here first.
T M C |
|
|
Similar Threads | ||||
Thread | Forum | |||
Built a brush guard | Design Center | |||
Happy Birthday Keith! | Announcements | |||
Brush guards | Design Center |