Can a 48v regen 2 be programmed to go faster?

[DOUGHBOYSFAST]

So far I have followed all of the great advice from this forum and members and my cart finally runs and charges great and for that I am grateful.


My cart tops out at about 13mph and I didn't know if there was anything I could do to bump it up a little without buying a new controller and or motor..

I have already bypassed the solenoid on the driver's side of t the cart, removed the external coil and unplugged the 3 pin speed sensor "I believe that's what you guys called it" i have also bypassed the OBC.

If no changes can be made that's fine I'm just thankful to have a great running cart but i figured i would ask..


Thanks again in advance for any and all help.

David