|
04-22-2013, 02:53 PM | #1 |
Not Yet Wild
Join Date: Mar 2013
Location: PLANO TX
Posts: 16
|
kf-82 valve train
does anyone know where to get the inserts for the valve tappets to adjust valve clearance?
|
04-23-2013, 06:01 AM | #2 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: kf-82 valve train
Are you missing some parts or are you looking for some kind of tool? I have a KF82 motor in pieces in my basement, do you need something from it? When I rebuilt one of my KF82 motors after it threw a rod, I never messed with any of the valvetrain parts so I'm not sure what you are needing.
|
04-23-2013, 09:00 AM | #3 |
Not Yet Wild
Join Date: Mar 2013
Location: PLANO TX
Posts: 16
|
Re: kf-82 valve train
i might call things wrong but here is what i am looking for off of the cam there are 2 pieces that relay motion up to the valves (i think these are the tappets) in the end that pushes against the valve there is an insert i beleve this is for adjusting the valve lash i am missing both inserts
|
05-30-2023, 01:03 PM | #4 | |
Not Yet Wild
Join Date: May 2023
Posts: 6
|
Re: kf-82 valve train
Quote:
|
|
05-30-2023, 01:39 PM | #5 |
Not Yet Wild
Join Date: May 2023
Posts: 6
|
Re: kf-82 valve train
I attached a picture with the broken part.
|
05-30-2023, 02:53 PM | #6 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: kf-82 valve train
Let me look and see if I have one.
|
05-30-2023, 03:57 PM | #7 |
Not Yet Wild
Join Date: May 2023
Posts: 6
|
Re: kf-82 valve train
That would be great. The exhaust and intake valve spring seats are the same, so either will work.
|
04-23-2013, 09:18 AM | #8 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: kf-82 valve train
I think I know what you mean now, they're like little caps that have like a small stem section that goes down into the lifter. I'm 80% pretty sure I do have those. I'll check when I get home.
|
04-23-2013, 12:56 PM | #9 |
Not Yet Wild
Join Date: Mar 2013
Location: PLANO TX
Posts: 16
|
Re: kf-82 valve train
let me know i am just going to start emailing you you are the kf-82 parts guy
|
04-23-2013, 07:12 PM | #10 |
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: kf-82 valve train
I have them. The two little caps in the foreground:
|
|
|
Similar Threads | ||||
Thread | Forum | |||
GX420 valve train upgrade pics. | Clone Engine Swaps | |||
briggs vtwin valve oil seal which valve | Big Block Talk! | |||
drive train? | Electric Club Car | |||
train horns | Gas Yamaha |