lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-14-2011, 11:24 AM   #1
vetman1
Not Yet Wild
 
vetman1's Avatar
 
Join Date: Mar 2011
Posts: 48
Default Winch Size Needed?

I have a 2008.5 lifted Club car precedent. What size winch should I consider?

Am I correct in that the cart weighs about 1000 lbs?

Thanks
Thomas
vetman1 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-14-2011, 01:58 PM   #2
Flintrock
Raised by coyotes
 
Flintrock's Avatar
Yamaha
 
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
Default Re: Winch Size Needed?

The general rule of thumb is 1.5 times your GVW. In my experience though this is way underrated. For instance a common cause for winching is mud. Mud however has an incredible suction force on a stuck vehicle. Steep hills, terrain obstacles, flat tires etc all put a lot more strain on a winch. Buy as much as you can reasonably afford. I think 2500-3000 #'s is a good starting point.
Flintrock is offline   Reply With Quote
Old 04-14-2011, 07:34 PM   #3
thewskrs
Gone Wild
E-Z-GO
 
Join Date: Apr 2010
Location: Malakoff, TX
Posts: 381
Default Re: Winch Size Needed?

What he said! I have a 2k unit but keep a snatch black to get more out of it.
thewskrs is offline   Reply With Quote
Old 04-14-2011, 08:07 PM   #4
vetman1
Not Yet Wild
 
vetman1's Avatar
 
Join Date: Mar 2011
Posts: 48
Default Re: Winch Size Needed?

I picked up a 2000 lb winch at Harbor Freight today for $40. It does not require any permanent wiring and it has a plate that allows you to slip it over a trailer ball. I figure for $40 plus tax I can burn it up without a lot of money lost.

I can use it on the front or the rear so I like that option as well. I wish they made a 3000 lb unit, but for the options on this winch I hope it will be good enough.

What is your opinion on spending probably $100 more to get the options that this one has?

I also wanted to wire an inline fuse to protect my cart and the winch. What size fuse do you think I should use?

Thanks,
Thomas
vetman1 is offline   Reply With Quote
Old 04-14-2011, 08:26 PM   #5
thewskrs
Gone Wild
E-Z-GO
 
Join Date: Apr 2010
Location: Malakoff, TX
Posts: 381
Default Re: Winch Size Needed?

I'm running a 30 amp inline on mine.
thewskrs is offline   Reply With Quote
Old 04-15-2011, 06:51 AM   #6
rokcrlr
Gone Wild
E-Z-GO
 
Join Date: Sep 2010
Location: Decatur,IL
Posts: 553
Default Re: Winch Size Needed?

I have 3000 for mine, If the HF winch quits , save the mounts and put a bigger one on them. Theres a seller on ebay that sells those winchs by the box full as returns.Be real carful not to put yourself in a way as you will REALLY need that winch.
rokcrlr is offline   Reply With Quote
Old 04-15-2011, 06:56 AM   #7
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
Default Re: Winch Size Needed?

FYI = I bought the HF 3000# winch for my single cart trailer and it is a real disappointment. I am using it to pull dead carts up a trailer ramp and it is going into (some kind of) thermal shut down. Get something better, bigger
scottyb is offline   Reply With Quote
Old 04-15-2011, 08:03 AM   #8
thewskrs
Gone Wild
E-Z-GO
 
Join Date: Apr 2010
Location: Malakoff, TX
Posts: 381
Default Re: Winch Size Needed?

Scotty, does your winch have the wireless remote? The ones with the remote have an interrupt in them. I don't know about the tethered types. Anyway it sounds like they are shutting down but they are shutting off and on to keep from over heating. But the tethered ones I have burnt plum up ! But we have burnt up Warns also.
thewskrs is offline   Reply With Quote
Old 04-15-2011, 08:05 AM   #9
thewskrs
Gone Wild
E-Z-GO
 
Join Date: Apr 2010
Location: Malakoff, TX
Posts: 381
Default Re: Winch Size Needed?

OOPs
thewskrs is offline   Reply With Quote
Old 04-15-2011, 09:23 AM   #10
crash12888
Gone Crazy
 
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
Default Re: Winch Size Needed?

Quote:
Originally Posted by scottyb View Post
FYI = I bought the HF 3000# winch for my single cart trailer and it is a real disappointment. I am using it to pull dead carts up a trailer ramp and it is going into (some kind of) thermal shut down. Get something better, bigger
Scotty, I probably have the same 3000lb winch on the Yamazuki and it has held up to a lot!
Any chance you got a bum one and can return it?
I will be puting one on Rhobyns Workhorse as well soon as I get the lift in place.
crash12888 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Winch Lifted Golf Carts
Looking for winch ? Gas EZGO
winch Gas EZGO
Help Needed 98 motor mount bolt size? Gas EZGO
New Winch? Lifted Golf Carts


All times are GMT -5. The time now is 12:40 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.