Kelly Controllers

rkersh409 · 08-04-2008, 04:35 PM

I went ahead and bought one for my 91 36v CC. At first I had lots of problems with the way it was set up. After several days of playing with the settings in the controller I kind of got it lined out. I still have a problem when I push on the throttle it will try to go (roll an inch or two) then trip the controller. Was happening all the time but Steven from Kelly Controllers told me to change the settings. Now it does it every now and then.

The other thing was they had to ship it from China. Took almost 2 weeks for the controller to arrive. Then I had to go to the post office to pick it up.

If I had it to do over again I would defiantly go with an Alltrax!

Otter70 · 08-04-2008, 04:53 PM

I'm going to go with and alltrax 4855 as soon as I can allocate the funds. The kelly controller thing isn't giving me the warm fuzzy I need. I just ordered #4 cable and two more deka gc10's. Where would be a good place online to order the cable ends I'm going to need.

scottyb · 08-04-2008, 07:14 PM

Local hardware or electrical supply ? Where are you gettting the welder's cable?

Otter70 · 08-04-2008, 07:47 PM

scottyb,

http://www.cableyard.com/catalog/pro...70a5b736fc0410

The cable ends I want have the solder already in them. I'll just get them at the welding supplier that my employer uses. I just figured that I could get them cheaper online. Even with the shipping, 40 feet of #4 was cheaper through the cable yard than getting here locally.

scottyb · 08-04-2008, 08:56 PM

http://www.cableyard.com/catalog/pro...70a5b736fc0410

Was that $4.60 each foot ?

roady89 · 08-04-2008, 11:08 PM

Thats 4/0, quite a bit different than 4 gauge.

scottyb · 08-04-2008, 11:31 PM

http://www.cableyard.com/catalog/pro...70a5b736fc0410

Okay, my mistake, here is the 4 AWG for $1.00 ft.

08-04-2008, 04:35 PM	#11
rkersh409 Not Yet Wild Join Date: Jun 2008 Location: Liberty, Tx Posts: 25	Re: Kelly Controllers I went ahead and bought one for my 91 36v CC. At first I had lots of problems with the way it was set up. After several days of playing with the settings in the controller I kind of got it lined out. I still have a problem when I push on the throttle it will try to go (roll an inch or two) then trip the controller. Was happening all the time but Steven from Kelly Controllers told me to change the settings. Now it does it every now and then. The other thing was they had to ship it from China. Took almost 2 weeks for the controller to arrive. Then I had to go to the post office to pick it up. If I had it to do over again I would defiantly go with an Alltrax!

08-04-2008, 04:53 PM	#12
Otter70 Gone Wild Join Date: Feb 2008 Location: Virginia Beach, Virginia Posts: 234	Re: Kelly Controllers I'm going to go with and alltrax 4855 as soon as I can allocate the funds. The kelly controller thing isn't giving me the warm fuzzy I need. I just ordered #4 cable and two more deka gc10's. Where would be a good place online to order the cable ends I'm going to need.

08-04-2008, 07:14 PM	#13
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,417	Re: Kelly Controllers Local hardware or electrical supply ? Where are you gettting the welder's cable?

08-04-2008, 07:47 PM	#14
Otter70 Gone Wild Join Date: Feb 2008 Location: Virginia Beach, Virginia Posts: 234	Re: Kelly Controllers scottyb, http://www.cableyard.com/catalog/pro...70a5b736fc0410 The cable ends I want have the solder already in them. I'll just get them at the welding supplier that my employer uses. I just figured that I could get them cheaper online. Even with the shipping, 40 feet of #4 was cheaper through the cable yard than getting here locally.

08-04-2008, 08:56 PM	#15
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,417	Re: Kelly Controllers http://www.cableyard.com/catalog/pro...70a5b736fc0410 Was that $4.60 each foot ?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-04-2008, 11:08 PM	#16
roady89 nimda Join Date: Jun 2007 Posts: 13,022	Re: Kelly Controllers Thats 4/0, quite a bit different than 4 gauge.
roady89 nimda Join Date: Jun 2007 Posts: 13,022

08-04-2008, 11:31 PM	#17
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,417	Re: Kelly Controllers http://www.cableyard.com/catalog/pro...70a5b736fc0410 Okay, my mistake, here is the 4 AWG for $1.00 ft.

Similar Threads
Thread	Forum
Controllers Wanted	Golf Carts and Parts
Controllers Help!!!!!	Electric Yamaha
Lift kits and controllers/motors	Electric Yamaha
EZGO Controllers	Electric EZGO
Controllers	Electric Club Car