|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
02-27-2015, 06:37 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2012
Location: ill
Posts: 17
|
g9 yammy
I aquired a ezgo engine with all wiring want to swap how hard is it any info would be nice
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-27-2015, 06:58 PM
|
#2 |
|
Searching for The Way
 Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: g9 yammy
Not understanding why your thread is titled "g9 yammy" but you are working on an Ezgo? Not understanding.
 |
|
|
|
|
03-29-2015, 06:09 PM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2012
Location: ill
Posts: 17
|
Re: g9 yammy
because im wanting to put ezgo motor in my yammy
|
|
|
|
|
03-29-2015, 06:38 PM
|
#4 |
|
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: g9 yammy
I've never seen that one done before. You'll need all the electronics from the G9. Prob need to drill new engine mounting holes to match whatever belt you are using. Starter gen should swap.
|
|
|
|
|
03-30-2015, 05:23 AM
|
#5 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: g9 yammy
Get rid of the ezgo engine and go with Yamaha or a big block.
|
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| My 97 Yammy! | Members Rides | |||
| Dead yammy | Gas Yamaha | |||
| 1999 Yammy on & off? | Electric Yamaha | |||
| Show me your Yammy | Lifted Golf Carts | |||
| G8 yammy | Members Rides | |||
Linear Mode
