|
07-20-2016, 11:25 AM
|
#11 |
|
Getting Wild
Join Date: Jul 2016
Posts: 88
|
Re: Carryall Project won't run
Id check your valve adjustmentment also if your havent already. Manual says .12mm(.0047in) for the fe290. I think your compression is good, generally anything over 100psi should run.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-20-2016, 01:36 PM
|
#12 |
|
Not Yet Wild
Join Date: Oct 2015
Posts: 27
|
Re: Carryall Project won't run
Are we sure my engine is supposed to turn clockwise? The id tag is worn off, but the emissions tag has build date of 1998, that's the engine, not sure about the cart's build date.
I see some wiring has been messed with in the box that the throttle cable goes into. Its a pedal start cart. Image of engine bay attached. [IMG]  [/IMG] |
|
|
|
|
07-20-2016, 04:35 PM
|
#13 |
|
What the ....?
 Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,934
|
Re: Carryall Project won't run
If the engine tag says 1998... It's clockwise rotation!
96 to 97 was the "iffy" year!  |
|
|
|
|
07-21-2016, 08:25 AM
|
#14 |
|
Getting Wild
Join Date: Jul 2016
Posts: 88
|
Re: Carryall Project won't run
Yes, the engine should definitely turn clockwise. If the starter is spinning it counter clockwise then you can just switch the green wire on the starter from A2 to A1 and vice versa with the ground.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 96' carryall 1 project | Gas Club Car | |||
| CC Carryall 6 Project | Electric Club Car | |||
| carryall project | Lifted Golf Carts | |||
| '96 Carryall 2 Project | Gas Club Car | |||
| Carryall Project | Gas Club Car | |||
Linear Mode
