|
12-11-2016, 03:19 PM
|
#1 |
|
Getting Wild
Join Date: Jan 2012
Location: Dothan, Al
Posts: 98
|
1981 Marithon
Can someone tell me how to remove the drive clutch from the engine? Helping a friend and we can not get the clutch off. Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-11-2016, 05:17 PM
|
#2 |
|
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,495
|
Re: 1981 Marithon
There's a picture of a home made puller here. http://www.buggiesgonewild.com/gas-e...-gas-cart.html
You remove the center bolt. Drop a brass, or aluminum rod into the hole that sits on top of the threads of the crankshaft. Then you thread a 3/4" fine thread bolt on top of that. Use an impact to drive it tight. The clutch will pop off. The engine needs to be removed for access. |
|
|
|
|
12-11-2016, 05:37 PM
|
#3 |
|
Getting Wild
Join Date: Jan 2012
Location: Dothan, Al
Posts: 98
|
Re: 1981 Marithon
Thanks Cart Around. We got it. Don't think it had been off since installed at the factory.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Marithon jerking | Electric EZGO | |||
| 92 marithon no torque | Electric EZGO | |||
| exhaust 2pg marithon to load | Gas EZGO | |||
| 81 marithon | Big Block Talk! | |||
| 89-marithon elect no spark | Electric EZGO | |||
Linear Mode
