|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-13-2017, 08:20 AM | #1 |
Not Yet Wild
Join Date: Apr 2017
Posts: 9
|
1984 ezgo belt question
I have an 84 ezgo and someone has converted it to a 4 stroke gas in a poor attempt. I need to remake the motor mounts and I was wondering if anyone could tell me the distance should be between the clutches?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-13-2017, 02:27 PM | #2 |
Getting Wild
Join Date: May 2016
Posts: 122
|
Re: 1984 ezgo belt question
I can tell you distance between engine mounts, if that helps. I have a subframe for an 87 2pg sitting beside me.
|
04-13-2017, 02:29 PM | #3 |
Not Yet Wild
Join Date: Apr 2017
Posts: 9
|
Re: 1984 ezgo belt question
I don't think that's going to help as this thing has a Honda 13hp mounted to the axle and I don't have any references to measure from other then center to center of clutches
|
04-14-2017, 08:59 AM | #4 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 1984 ezgo belt question
11 3/4 " center-center if that helps.
|
04-14-2017, 09:20 AM | #5 |
Not Yet Wild
Join Date: Apr 2017
Posts: 9
|
Re: 1984 ezgo belt question
That helps a ton thank you. Now I wish I had reverse!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1984 ezgo secondary clutch question. | Gas EZGO | |||
79 ezgo belt question | Gas EZGO | |||
1993 ezgo drive belt question | Gas EZGO | |||
1984 EZGO Ignition Question. | Gas EZGO | |||
1984 EZGo Question. | Gas EZGO |