|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-23-2018, 06:57 PM | #11 |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
Re: G16 Motor Rebuild? Or Valve Seals?
mine is smoking bad when running also, i tore motor apart and the oil ring on piston appears fine, and the valve steam seal looks fine as well. Not sure what else it could be..
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-24-2018, 03:04 AM | #12 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G16 Motor Rebuild? Or Valve Seals?
appears fine? By what measure? If your Yamaha smokes constantly/badly, you need rings, or bore/piston/rings. Unless the motor is way overfull with oil/fuel mix and airbox is loaded with nasty juice too. Valve stem seal only makes brief smoke on startup, not much oil is available up there.
|
07-24-2018, 05:53 AM | #13 | |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
Re: G16 Motor Rebuild? Or Valve Seals?
Quote:
Sent from my Pixel 2 XL using Tapatalk |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Valve Seals | Gas EZGO | |||
valve stem seals ? | Gas Club Car | |||
valve seals | Gas Yamaha | |||
Valve stem seals | Gas EZGO | |||
'96 G14 valve seals | Gas Yamaha |