|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-01-2017, 05:49 PM | #1 |
Not Yet Wild
Join Date: Feb 2017
Location: Kent Island Maryland Eastern Shore
Posts: 39
|
What did I do wrong?
2 inch Yamaha lift. Both the right and left side rims are rubbing on the bolt towards the rear of the cart.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-01-2017, 06:44 PM | #2 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: What did I do wrong?
What size wheels/rims do you have
|
07-02-2017, 03:25 AM | #3 |
Not Yet Wild
Join Date: Feb 2017
Location: Kent Island Maryland Eastern Shore
Posts: 39
|
Re: What did I do wrong?
18x8.50-8 standard tire and wheel that came with the cart.Guess I will need to orders ten inch wheel and tire combo. I was just concerned that I made mistake in installing the lift kit.
|
07-02-2017, 08:15 AM | #4 |
Guest
Posts: n/a
|
Re: What did I do wrong?
all lifts require a 10" + rim
|
07-02-2017, 09:11 AM | #5 |
Getting Wild
Join Date: Jun 2017
Posts: 78
|
Re: What did I do wrong?
Thanks for the picture. I haven't torn my cart down yet for the install but I really couldn't figure out exactly how the spacer went in. Now I do, thanks.
Besides this issue, how was the install? |
07-03-2017, 02:17 PM | #6 |
Not Yet Wild
Join Date: Feb 2017
Location: Kent Island Maryland Eastern Shore
Posts: 39
|
Re: What did I do wrong?
The install went well with the help of PingEye3 pictures.i am not a mechanic and it took about 4 hrs including the toe in adjustment. Directions with the kit were not to good so print out Pings pictures. I got the kit off EBay for $307 delivered and everything was Yamaha packaged and fit perfect
|
07-04-2017, 12:11 AM | #7 |
Getting Wild
Join Date: Jun 2017
Posts: 78
|
Re: What did I do wrong?
I agree the instructions are not that great so I already have his as well as your above printed. I should get my cart back on Friday and will install the lift this weekend. I need to lookup instructions for the toe alignment.
I also got mine on ebay but for 299 delivered. Thanks for all of your info! |
07-04-2017, 05:47 AM | #8 |
Not Yet Wild
Join Date: Apr 2017
Posts: 38
|
Re: What did I do wrong?
Would a set of 1" wheel spacers fix the issue?
|
07-04-2017, 07:24 AM | #9 |
Not Yet Wild
Join Date: Feb 2017
Location: Kent Island Maryland Eastern Shore
Posts: 39
|
Re: What did I do wrong?
Wheel would work,but I ordered a set of 10" wheel with 20" tires yesterday. Was going to use the original tires an wheels until they wore out but bit bullet.
|
07-04-2017, 08:42 AM | #10 |
Gone Wild
Join Date: Sep 2014
Location: Orlando, FL
Posts: 1,308
|
Re: What did I do wrong?
They probably would work. When I first installed the lift kit, the new wheels and tires had not arrived yet. So, when I went to install the stock tires, they would not fit. For short term, I was able to install two lugs nuts on the hub and then the wheel over them and then lug nuts. Thus about a 1" spacer. This worked until the new wheels came.
Thanks for the compliment, Naturallight. |
|
|
Similar Threads | ||||
Thread | Forum | |||
What could be wrong?? | Electric EZGO | |||
Got it wrong!!! | Electric Club Car | |||
what's wrong with this kit ? | Gas Club Car | |||
What Did I Do Wrong ? | Electric EZGO |