|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-15-2019, 09:25 AM | #1 |
Gone Wild
Join Date: May 2013
Location: marblehead ohio
Posts: 214
|
Greasing front end G-16
Anyone know where the grease fitting on a G-16 front end is located ?
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-15-2019, 09:42 AM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Greasing front end G-16
Keep looking... There are none.
Yamaha has never put fittings on their front ends. |
04-15-2019, 09:44 AM | #3 |
Gone Wild
Join Date: May 2013
Location: marblehead ohio
Posts: 214
|
Re: Greasing front end G-16
|
04-15-2019, 12:40 PM | #4 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: Greasing front end G-16
When I first saw the roll pins on the spindles, I thought they were broken off zerk fittings...
|
04-15-2019, 03:34 PM | #5 |
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: Greasing front end G-16
Its doesn't mean that it doesn't need to be greased. They Just want you to take it all apart and grease it by hand. Not a big issue if its being done on a regular basis. Problem is most shops don't do it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Front Hub Assembly Replacement - Greasing and Tightness | Electric Club Car | |||
Greasing the clutch?? | Gas Yamaha | |||
Greasing bearings front bearings/ Bearing Buddies? | Gas EZGO | |||
Greasing the clutch?? | Gas Yamaha | |||
clutch greasing | Gas Yamaha |