|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-24-2020, 09:27 PM | #1 |
Not Yet Wild
Join Date: Jul 2016
Posts: 40
|
G16 bent counterbalance shaft
Hi. I am overhauling a g16. Had a busted connecting rod. Putting it all back together and turning it over by hand and it gets jammed every 4 revolutions. Took it apart. Counterbalance shaft wobbles in bearing when you spin it in the cover. I looked on a couple different sites and cant find one to buy. Can I run this motor without it?? Anyone know where I can get a new or good used counterbalance shaft. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-24-2020, 09:31 PM | #2 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,646
|
Re: G16 bent counterbalance shaft
Partzilla for new one. Check with Daveinva if he has a used one
|
06-24-2020, 10:02 PM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G16 bent counterbalance shaft
|
06-25-2020, 05:18 AM | #4 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: G16 bent counterbalance shaft
|
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB Club Car kf 82 counterbalance | Golf Carts and Parts | |||
alignment of counterbalance KF82 | Gas Club Car | |||
Bent movable contact shaft and arm assembly | Electric EZGO | |||
Bent Shaft? | Electric EZGO | |||
G2A J38 counterbalance clocking | Gas Yamaha |