|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-12-2020, 07:55 PM | #1 |
Gone Wild
Join Date: May 2009
Posts: 377
|
G16a driven clutch
I’m working on the driven clutch what’s the best way to compress and hold the clutch during reassembly? Does anyone have the golf cart king fixing tool, if so how does it work ? Thanks for any and all feedback!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-12-2020, 08:59 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G16a driven clutch
It's possible to run a ratchet strap around the case & the sliding sheave to hold the spring.
|
09-13-2020, 07:04 AM | #3 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: G16a driven clutch
If it's a stock spring I just hold it by hand. If it won's stay or it's a bigger spring I use a ratchet strap. I've seen the tool, but I don't have one. Looks like it would work.
|
09-13-2020, 07:29 AM | #4 |
Gone Wild
Join Date: May 2009
Posts: 377
|
Re: G16a driven clutch
Thanks guys for your replays! It is a heavy duty red spring. I will give the ratchet a shot.
|
09-13-2020, 04:09 PM | #5 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: G16a driven clutch
|
09-13-2020, 08:35 PM | #6 |
Gone Wild
Join Date: May 2009
Posts: 377
|
Re: G16a driven clutch
I have a rear seat on it so I'm not worried about top end.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G16A clutch | Gas Yamaha | |||
1997 G16a clutch weight broken off | Gas Yamaha | |||
Yamaha G16A Clutch Question | Gas Yamaha | |||
G16a driven clutch stationary sheave is stuck and isn't budging. | Gas Yamaha | |||
Shimming a driven driven clutch | Gas EZGO |