lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 12-06-2020, 08:59 PM   #1
KRI
Not Yet Wild
 
Join Date: Dec 2020
Posts: 6
Default G1 bypass petal switch

Hi I am new to the g 1 cart .
I have been trying to jump my petal switch . I would like it to start rite up and go .I was messing with the wires and blew the online fuse . I fixed it. Now I have no spark it don’t start at all just starter spins and spins when I hit petal . It was fine before I try to jump wires .
So how do I jump the wires ?
And could I blew up my cdi box ? How can I add pics. ?
Attached Images
File Type: jpg 1F63D7FB-FF2A-4A74-9F3D-9C817F9B39B5.jpg (20.2 KB, 0 views)
KRI is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 12-07-2020, 10:14 AM   #2
KRI
Not Yet Wild
 
Join Date: Dec 2020
Posts: 6
Default Re: G1 bypass petal switch

I see I figured out to add pictures now to jump the petal switch ?
KRI is offline   Reply With Quote
Old 12-07-2020, 01:07 PM   #3
mikeasis
Gone Wild
Yamaha
 
Join Date: Jan 2017
Location: venice
Posts: 1,805
Default Re: G1 bypass petal switch

you wanting it to start and idle, stay running?

the G1 is not designed to do this and it will over heat. that said the only way to get it close to what you want is by putting the cart in maintenance mode.
disconnect the black wire with white stripe coming out of the CDI. you still start it with the pedal but it will only shut off by turning they key switch to the nuetral position.

again the engine will over heat if left like this
mikeasis is offline   Reply With Quote
Old 12-07-2020, 01:23 PM   #4
KRI
Not Yet Wild
 
Join Date: Dec 2020
Posts: 6
Default Re: G1 bypass petal switch

Ya that about rite .
Can you tell me what volts should be coming out of my petal wires ? I see 4 as in pic . I see red is 12 volt when petal is pressed . But the other 3 ?
KRI is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Anyone bypass their key and just put a switch? Electric Club Car
G2 has, how to bypass key switch Gas Yamaha
Reed Switch Bypass Electric EZGO
Help With Key Switch Bypass Gas Club Car
bypass the oil switch Clone Engine Swaps


All times are GMT -5. The time now is 08:12 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.