|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-07-2021, 01:36 PM
|
#1 |
|
Gone Wild
Join Date: May 2010
Location: Plainwell mi but from Ohio GO BUCKS!!!
Posts: 167
|
Yamaha g16 clutch replacement
My primary clutch started sticking real bad so I replaced it with a aftermarket clutch, Now it goes a lot slower.
Can I rebuild my old clutch or can I just clean it real good and put it back on. It doesn't look like it has anything broken it just keeps sticking and doesn't like to open and close. If I can clean it should I spray it with any kind of lubricant? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-07-2021, 02:47 PM
|
#2 |
|
Getting Wild
Join Date: Jun 2019
Location: Virginia
Posts: 120
|
Re: Yamaha g16 clutch replacement
Remove the phillip head bolts and take the dust cover off. Operate the clutch by hand too see what is sticking, could be old gummed up grease. This also helped me realize how my primary works. There should be a zerk fitting on the dust cover side of the primary clutch. Only use 1-2 pumps of grease or you will have a huge mess.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Yamaha Drive G29 secondary clutch replacement | Gas Yamaha | |||
| Yamaha G2-G22 OEM Replacement Secondary Clutch | Clone Engine Swaps | |||
| 1982 clutch ramp button replacement and 'clutch tool" | Gas EZGO | |||
| Yamaha G2 Rebuild, Parts questions, Rebore advice, and Clutch replacement question | Gas Yamaha | |||
| 1994 Yamaha G9 - How hard is clutch replacement? | Gas Yamaha | |||
Linear Mode
