04-18-2010, 06:37 AM | #1 |
Not Yet Wild
Join Date: Apr 2010
Location: Plaqumeine, Louisiana
Posts: 22
|
Carryall Project
The Carryall project continues. I have a 92 Carryall missing engine and a 2006 Carryall in pretty good condition. I want to take the lift kit off the 92 and install on 06. It goods like this kit requires cutting the 06 frame, is this correct. Doesn't look to be to big of a deal. Rear end seems real easy.
The 06 has 2 problems I need to fix. 1. The clutch on the engine seems to be noisey and jerks a little on take off, any ideas? 2. After you are going a minute or so, the engine seems to slow down and then speed back up but not as fast as at first. Last edited by Attakapas24; 04-18-2010 at 06:44 AM.. Reason: ? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-18-2010, 07:20 AM | #2 |
Gone Wild
Join Date: Sep 2009
Location: Forest City N.C.
Posts: 2,660
|
Re: Carryall Project
Must be an old lift kit where you have to cut the frame,like a Zbar lift? I would never cut a frame cause once you do that you can never change it back if you wanted to.There is sponsers on here that have nice lift kits,I suggest you speak to one of them.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Old Carryall 2 | Gas golf carts | |||
CC ' 01 48v Carryall I Project with Pictures | Electric Club Car | |||
Do you think 800 hrs is a lot on a Carryall 2 ? | Gas Club Car | |||
Carryall V-1 | Gas Club Car | |||
carryall 2 | Lifted Golf Carts |