02-16-2011, 06:07 PM | #1 |
Not Yet Wild
Join Date: Feb 2011
Posts: 12
|
Top question
As I am rebuilding this 94 Marathon, I have removed the top to paint and to straighten the bent framing around it.
My question is: from front to back where the metal frame attaches to the top, is it supposed to be dead flat or does it have a slight arch to it? Mine is to bent to tell. Thanks for the help! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-16-2011, 08:11 PM | #2 |
Gone Wild
Join Date: May 2010
Location: Upstate, S.C.
Posts: 208
|
Re: Top question
from the side view-the top sits lower in the back/rear then the front (for water run off I guess)....if that is what you mean, and there IS an arch(up) in the center between front mount and rear mount.
Looking straight on (front and/or rear) it is even/level across. If your question made the right sense to me, then I hope my answer made sense to you |
02-16-2011, 08:45 PM | #3 |
Not Yet Wild
Join Date: Feb 2011
Posts: 12
|
Re: Top question
Perfect, thanks for the reply!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1990 Club car With flat head Rev limiter question and govenor question | Gas Club Car |