|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-06-2011, 07:27 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2011
Location: Fairbury, IL
Posts: 14
|
Height of supports? G22A
I want to make my own roof supports for my G22A. Can someone give me the sizes for the front U shape support and a good Pic. Need to know where to bent or weld the angle or 90 at. I also need the know about the 2 back supports like the size and where the bents are. Please add pics and be good with the size. Thank you!!!
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-08-2011, 01:05 AM
|
#2 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Height of supports? G22A
Rally, I'm guessing here, but I think my windshield frame is 39 " wide. Don't know how tall it is, but my top is 53" from the floor of the car to the under side of the aluminum frame on the top.
Hope this helps! |
|
|
|
|
07-08-2011, 10:52 AM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2011
Location: Fairbury, IL
Posts: 14
|
Re: Height of supports? G22A
That does help some. I need to know how long to frame is up and down as well.
But thanks again for the 39in |
|
|
|
|
07-08-2011, 11:01 AM
|
#4 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Height of supports? G22A
53" - what ever the dash board height is.
53 is the only critical # you need. Measure the mounting area of your top, will give width. Mounting area on the rear seat back up to 53 will give you rear support length. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Height of roof? I am making supports | Gas Yamaha | |||
| bought a g22a | Gas Yamaha | |||
| G22A Won't start | Gas Yamaha | |||
| Pictures of my G22A | Gas Yamaha | |||
Linear Mode
