ezgo/18hp Honda motor swap questions

[rcn11thacr]

I have a lifted 98 TXT with a robin 29c motor. I have a generator with an 18 hp honda motor as a donor since the generator parts are bad. I've noticed the accessory kit for a honda install is about $1500.00 which is nuts. I have the tools and the shop to fabricate the needed parts, i just dont have any diagram/blueprints to go by. I've been searching to find a build like this one so i could glean some insight into whats required. However i have not been successful. Can anyone offer assistance?

[Nate69]

man gl with this build i would love to see it because i want to do the same thing , yea i saw that $1500 !! thats as bad as paying $800 for a muffler for my 90 !!!

[rcn11thacr]

I'd be happy to, just dont want to reinvent the wheel doing so. Someone has got to have some nice build pics i can look at. Anyone?

[racin161]

Your in luck!!! go to the BIG BLOCK forums and you'll find out every thing you need to know. Just post your questions and there will be a ton of help K. Also we all like pics

[essness]

Rcn, take a look at this link, CPP already makes this carrige and it will work with your motor.

http://www.cartpartsplus.com/ezgo-bi...e-carrier.html

You can also take a look at this link,

http://www.buggiesgonewild.com/lifte...yard-cart.html

It's kinda long but includes my Honda GX620 install with the engine cradle from CPP.

You can also look though the Big Block section to see what others have done and are doing.

Good luck

[rcn11thacr]

Thanks for the help guys. So far im on page 13 of the fabrication forum and evidently missed one of these links. I also didnt realize the 18 hp was a bigblock

[racin161]

YEP