|
|
|||||||
| Gas Club Car Gas DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
04-09-2013, 06:57 AM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2013
Posts: 1
|
Replacing the FZ340 with FE400
Hi guys I want to know if I can directly swap in a Kawasaki FE400 in my 1990 Club car? My old FZ340 engine died and our local parts dealer told me that I can dump the car. I see that the FE400 is also counter-clockwise rotation, but will it swap directly?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-09-2013, 08:15 AM
|
#2 |
|
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: Replacing the FZ340 with FE400
No I don't believe it is a direct swap from what I've heard. There are differences. Someone else may be able to comment further.
|
|
|
|
|
04-11-2013, 10:40 PM
|
#3 |
|
Gone Wild
Join Date: Jan 2007
Location: La Porte Indiana
Posts: 1,392
|
Re: Replacing the FZ340 with FE400
if you have EVERYTHING from a donor cart, probably could be done. there is no parts interchange. also your forward will b reverse unless u swap out to a newer axle
the best choice in my opinion would be a briggs or clone transplant |
|
|
|
|
04-11-2013, 10:59 PM
|
#4 |
|
Not Yet Wild
Join Date: Jul 2012
Location: Lacrosse WI
Posts: 42
|
Re: Replacing the FZ340 with FE400
As long as it's a counter clockwise motor the forward and reverse should be the same. As for the rest I'm sure it can be done but it may not be a direct bolt in.
|
|
|
|
|
04-14-2013, 08:19 PM
|
#5 |
|
revolutiongolfcars.com
 Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Replacing the FZ340 with FE400
The FE400 is not counter clockwise..... Atleast not in Club Car applications. It may be available elsewhere in a CCW setup.
|
|
|
|
|
04-22-2013, 10:12 PM
|
#6 |
|
Not Yet Wild
Join Date: Aug 2012
Location: Indpls
Posts: 36
|
Re: Replacing the FZ340 with FE400
rotation aside it is a direct swap except the exhaust. I have put one in my 2007 Precedent and it was completely painless.
|
|
|
|
|
04-22-2013, 10:45 PM
|
#7 |
|
Gone Wild
Join Date: Dec 2012
Location: Dale, TX
Posts: 163
|
Re: Replacing the FZ340 with FE400
I think the alternator bracket is a little different too. Wish I could find one to put in my pioneer 1200.
|
|
|
|
|
04-23-2013, 05:54 AM
|
#8 | |
|
Photoshop Guy
Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,845
|
Re: Replacing the FZ340 with FE400
Quote:
|
|
|
|
|
|
04-24-2013, 09:50 AM
|
#9 |
|
Not Yet Wild
Join Date: Apr 2013
Posts: 2
|
Re: Replacing the FZ340 with FE400
If you consider parting out your old kf82 engine I am in need of an excitor coil. It sits behind the flywheel. Let me know I would definitely be interested in this hard to find part.
|
|
|
|
|
08-01-2013, 11:29 AM
|
#10 |
|
Not Yet Wild
Join Date: Nov 2012
Location: Jackson,Tn
Posts: 21
|
Re: Replacing the FZ340 with FE400
I have a KF82 that came out of my 1991 CC DS. It smoked a little a start-up. I replaced it with a clone motor. Doesn't include the clutch.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Club Car FZ340 Spark Issue | Gas Club Car | |||
| FE400 install | Lifted Golf Carts | |||
| FE400 Max RPM | Gas Club Car | |||
| What is the original bore size of a FZ340? | Gas Club Car | |||
| need engine specs for KF82-FZ340 | Gas Club Car | |||
Linear Mode
