|
07-31-2014, 10:54 AM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2013
Location: North Mississippi
Posts: 70
|
Starter/Generator Bolt
My S/G crapped out on me after some off-roading and high water. I knew it was coming because I was using the old "tap the S/G with a hammer" technique.
Anyway, long story short, taking the assembly apart because the brushes were non-existent basically and twisted one of the through-bolts off at the threads. I can get it out because it actually broke ABOVE the threaded area so that's not a problem. My problem is, where the heck do I get another one and what size are they? I found one set on the internet that is $4 bucks but $14 dollars shipping. That ain't happening! Any recommendations? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-04-2014, 01:10 PM
|
#2 |
|
Not Yet Wild
Join Date: Oct 2013
Location: North Mississippi
Posts: 70
|
Re: Starter/Generator Bolt
Anybody have a junk starter lying around? I can't find a replacement bolt anywhere. It's M6x180mm bolt.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Starter Generator Bolt broken | Gas Club Car | |||
| Will a G16 Starter Generator bolt to a G9? | Gas Yamaha | |||
| Starter Bolt Broke Use other bolt question | Electric EZGO | |||
| 88 ezgo gas starter/generator stuck in starter mode | Gas EZGO | |||
| Starter/Generator | Gas EZGO | |||
Linear Mode
