Spark Issue Stumped!! 96 TXT
Good morning all I have a 96 TXT with the twin cylinder robin engine and I just can't get it running, ign coil is good (tested it on a friends cart) replaced the ignitor with the HEI conversion replaced the pulsar coil yesterday however I have a suspicion that this is still the issue. When I check the readings on the pulsar they are exactly the same as the one I took off resistance is 20 OHMs with 250mV AC when cranking. Could it just be that I set the air gap incorrectly? The pulsar I took off was completly missing the metal pickup that sticks out. I set the air gap on the new one to .025, I set it with the pulsar lined up with the "gap" on the flywheel. Any ideas are greatly appreciated, I'm at about wits end with this thing!
Thanks
Joe
|