RXV Front engine Mount

[IRwynn]

Juts picked up a 2011 gas RXV with 6 inch lift. Not sure of the lift but it looks like the RHOX heavy duty lift. My first gasser and wow and I shocked by the amount of vibration, the score card holder rattles when accelerating. So I am looking to see if there is anything to quite the noise and vibration. Since i have a club car precedent electric the gasser is a huge noise and vibration difference.

Poking around I see the front engine mount so with a bolt and a couple of specialty washers. Checking the RXV manual it shows in one manual a compression spring part number 606166, another shows a top and bottom bumper part number 605757 (looking it up says txt not RXV) . Looking under the cart there is nothing like either of these and they well be correct and from the lift kit. So I took some photos and hope I can get some clarity and hope this coud help with vibrations

thanks in advance
RDW

PS Just found this manual and it shows the spring, while in my pics it is missing

[IRwynn]

I guess a better question is does this need the drop bracket for the motor? The original bracket is in place.


https://www.golfcartking.com/rear-br...rxv-gas-carts/

[svtnos]

yes it needs a drop bracket.. I bought mine from golf cart king, they seemed to be the only ones who have a drop bracket.. its crazy that none of the lift kits comes with the drop bracket even though the same company makes both.

at the same time though, the 13hp kawasaki naturally shakes waaay more than the 9 and 11 hp kawasaki in the club cars.. the drop bracket will help alot.

[IRwynn]

Thanks!