![]() |
|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: Dec 2007
Posts: 10
|
![]() I just installed new brushes on a 2hp Hyundai golf cart motor however I am unsure where he lead from the battery goes. 3 of the connections are labeled as A1, S2, F1. I hooked A1 to A1 on the motor. I hooked S2 to S2 on the motor and I hooked F1 to S1 on the motor (just a guess) There is nothing hooked to A2 and there are two more wires to hook up. The battery and a negative that goes to the where the charger connects (its black) Can some one help me before I blow it up!!!!! Thanks CODE OUT.
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
nimda
![]() ![]() Join Date: Jun 2007
Posts: 13,023
|
![]() Should be A1 and A2 for armature then either S1 and S2 OR F1 and F2 for feild. The S and F are both letters for feild connections.
What A2 are you referring too? Is it on the controller?...got any pics of the electrical? |
![]() |
![]() |
![]() |
#3 |
Just me. .
![]() Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
|
![]() there's still a running hyundai out there?
|
![]() |
![]() |
![]() |
#4 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
![]() |
![]() |
![]() |
![]() |
#5 |
Just me. .
![]() Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
|
![]() i threw one away about 4 months ago... dug it out from the graveyard, stripped a few goodies off, and buh bye..
|
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
Join Date: Dec 2007
Posts: 10
|
![]() I tested the connection by using the reverse buzzer to test the circuit. It seems to be working fine played 18 holes in 2.5 hrs yesterday. It runs great!!!! I'll take a pic and post on xmas day. Have to go to the parents today. Thanks for the help.
|
![]() |
![]() |
![]() |
#7 |
Just me. .
![]() Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
|
![]() I think you can put an EZ-GO motor in that thing and make it run A LOT better, and faster.. by factory specs, hyundai was using the cheapest D.C. motors they could find...
|
![]() |
![]() |
![]() |
#8 |
Not Yet Wild
Join Date: Dec 2007
Posts: 10
|
![]() Yeah I found a couple 2hp motors that would work. The cheapest was from a place called "the solar.biz" or somthing like that. They quoted me 365 plus 35 shipping so I figured I'd try smoothing the armature and going the brushes and new bearing route before I put 400 dollars in a obsolete cart. Can you get me one cheaper or lead me in the direction of a cheaper dealer?
|
![]() |
![]() |
![]() |
#9 |
Not Yet Wild
Join Date: Dec 2007
Posts: 10
|
![]() Here's a pic of the beast. Sorry about the posting error, thanks NO NO... This forum is pretty cool thanks for you guys help and Merry Xmas. Matt
![]() |
![]() |
![]() |
![]() |
#10 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
![]() |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
PDS Motor Question | Electric EZGO | |||
Quick Question | Gas Yamaha | |||
A fun question.. | Gas Club Car | |||
Question about Motor Terminals | Electric Club Car |