1985ish ez go marathon steel nose

outlaw fab shop · 10-16-2011, 05:51 PM

Hello guys, been on here for a while, taking in all the info i can, did a search for body removal, and found nothing for my old azz cart. Does anyone have any info on this? I havent really looked that hard at my cart yet, but, would like some direction if possible. btw its a gasser, if that matters....
thanks,
mark

madoc1 · 10-17-2011, 09:01 AM

go to the top of this forum, and find the sub forum
'gas tech".. in there find the thread with the gold stars. you will see a link in there to bennetts carts. your parts manual will be in there. marathon bodies up to 88 were all pretty much the same. on the 89-93 models only the cowl was changed and not much.

and welcome to BGW.

shaggy · 10-17-2011, 07:18 PM

the whole thing has got studs welded on it , it all pretty much unbolts ( 3/8 i think) from the bottom. nose cone everything. EXCEPT, there are some bolts for the steel nose under/behind plastic tray. once you get it unbolted, you have to "stretch" the fenders out to get the studs free, and off it comes. hope this helps.....shag

10-16-2011, 05:51 PM	#1
outlaw fab shop Not Yet Wild Join Date: May 2010 Posts: 8	1985ish ez go marathon steel nose Hello guys, been on here for a while, taking in all the info i can, did a search for body removal, and found nothing for my old azz cart. Does anyone have any info on this? I havent really looked that hard at my cart yet, but, would like some direction if possible. btw its a gasser, if that matters.... thanks, mark

10-17-2011, 09:01 AM	#2
madoc1 no clue Join Date: Sep 2009 Location: spicewood, texas Posts: 3,308	Re: 1985ish ez go marathon steel nose go to the top of this forum, and find the sub forum 'gas tech".. in there find the thread with the gold stars. you will see a link in there to bennetts carts. your parts manual will be in there. marathon bodies up to 88 were all pretty much the same. on the 89-93 models only the cowl was changed and not much. and welcome to BGW.

10-17-2011, 07:18 PM	#3
shaggy Getting Wild Join Date: Jun 2008 Posts: 80	Re: 1985ish ez go marathon steel nose the whole thing has got studs welded on it , it all pretty much unbolts ( 3/8 i think) from the bottom. nose cone everything. EXCEPT, there are some bolts for the steel nose under/behind plastic tray. once you get it unbolted, you have to "stretch" the fenders out to get the studs free, and off it comes. hope this helps.....shag
shaggy Getting Wild Join Date: Jun 2008 Posts: 80

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
88 CC Nose	Gas Club Car
Need a plastic nose for a Marathon after a small collision	Golf Carts and Parts
WTB - Plastice nose from a 1988 to 1993 EZGO Marathon.	Golf Carts and Parts
Looking for a used nose piece	Electric Club Car
WTB Looking for a rubber nose with lights for marathon	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum