|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-12-2014, 12:41 PM | #11 |
Not Yet Wild
Join Date: Jan 2014
Location: Honey Brook, PA
Posts: 20
|
Re: 1979 Robin Engine # EC25DS
yes i do. i am just not familiar on how to use it properly. i only use it for work on the audio setting to see if i have continuity on items.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-12-2014, 12:45 PM | #12 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: 1979 Robin Engine # EC25DS
You can use the continuity setting. When you touch the two meter leads together, you should have continuity. Pull the black wire off the coil and put one meter lead on the wire. Put the other meter lead on the engine block/ground. As you rotate the motor slowly by hand, you should have continuity for the majority of the revolution. At some time, just prior the TDC, you should lose continuity. As you keep turning the motor, you should get continuity again.
|
01-12-2014, 12:53 PM | #13 |
Not Yet Wild
Join Date: Jan 2014
Location: Honey Brook, PA
Posts: 20
|
Re: 1979 Robin Engine # EC25DS
ok. so i got nothing when holding one lead to the black wire and the other wire to the battery ground.
|
01-12-2014, 12:54 PM | #14 |
Not Yet Wild
Join Date: Jan 2014
Location: Honey Brook, PA
Posts: 20
|
Re: 1979 Robin Engine # EC25DS
let me be more informative. i had no continuity through out the entire revolution.
|
01-12-2014, 12:55 PM | #15 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: 1979 Robin Engine # EC25DS
No continuity at all while turning the motor?
Did you get continuity when you touched the two meter leads together? Do you have continuity between battery ground and the motor case? |
01-12-2014, 12:58 PM | #16 |
Not Yet Wild
Join Date: Jan 2014
Location: Honey Brook, PA
Posts: 20
|
Re: 1979 Robin Engine # EC25DS
no continuity at all.
I touched the leads and got an audible I touched the battery ground with the grounding strap bolt and had continuity. |
01-12-2014, 12:59 PM | #17 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: 1979 Robin Engine # EC25DS
Check it again while wiggling the black wire that goes into the motor. Put the motor at BDC first.
|
01-12-2014, 01:00 PM | #18 |
Not Yet Wild
Join Date: Jan 2014
Location: Honey Brook, PA
Posts: 20
|
Re: 1979 Robin Engine # EC25DS
what is bdc? sorry
|
01-12-2014, 01:02 PM | #19 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: 1979 Robin Engine # EC25DS
Bottom Dead Center.
Piston at the bottom of the cylinder. You can pull the plug and use a pencil to see when it is at BDC. Don't lose the pencil inside the cylinder. |
01-12-2014, 01:06 PM | #20 |
Not Yet Wild
Join Date: Jan 2014
Location: Honey Brook, PA
Posts: 20
|
Re: 1979 Robin Engine # EC25DS
still no continuity at all
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1979 Ezgo Robin EC25DS sta. gen brushes | Gas EZGO | |||
1979 Robin 244cc 2pg 2stroke, electrical problem | Gas EZGO | |||
1979 Engine Sputtering | Gas Harley Davidson | |||
244 robing rebuild - 1979 Engine | Gas EZGO |