|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
08-09-2020, 11:35 AM
|
#1 |
|
Not Yet Wild
Join Date: May 2020
Posts: 50
|
G1 governor question
I have read the stickies and am thinking about removing my governor on my g1. My question is this. My cart sputters at high speeds. Is this because of the governor? When i look at the throttle linkage and how to set it up in the manual, it appears the throttle door on the carb is set to open all the way. So what is the governor actually doing? is it stopping the the carb from opening all the way or is it limiting my rpm some how? Or am I missing something? When I adjust the screw on it, i feel I have no real change in speed.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-09-2020, 12:59 PM
|
#2 |
|
Searching for The Way
 Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: G1 governor question
Golf cart governors use ground speed rpm to limit speed. They don't limit engine rpm. Some carts have electronic engine rev limiters, but a G1 does not have one.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G2 Governor Arm Question | Gas Yamaha | |||
| governor question G29 | Gas Yamaha | |||
| Governor question | Gas Yamaha | |||
| Governor question | On Road Golf Carts! | |||
| G2 governor question | Gas Yamaha | |||
Linear Mode
