|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-20-2018, 10:16 AM | #1 |
Not Yet Wild
Join Date: Apr 2018
Posts: 1
|
Ydr g29 governor delete
I've already tighten the bolt all the way down and my cart will do 19mph looking to get rid of it all together. How do I do that?
Also can someone point me in the direction of this airbox mod? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2018, 08:05 AM | #2 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: Ydr g29 governor delete
|
04-21-2018, 08:30 AM | #3 | |
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: Ydr g29 governor delete
Quote:
So you want to over speed the motor and shorten the life of it? Put high speed gears in it, be able to do 27 mph and turn the motor 2500 RPM |
|
04-21-2018, 09:39 AM | #4 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Ydr g29 governor delete
Site sponsor Cart Parts Plus, sells a governor speed spring. and it works.
|
04-21-2018, 10:08 AM | #5 |
Gone Wild
Join Date: Jun 2013
Posts: 427
|
Re: Ydr g29 governor delete
|
04-21-2018, 10:46 AM | #6 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Ydr g29 governor delete
The original bushings will work as long as your careful not to break them when installing the governor arm and spring onto the governor shaft. I have found it's easier to leave the treaded adjustment rod off or barley attatched till you get it installed on the shaft.
|
04-21-2018, 11:20 AM | #7 | |
Gone Wild
Join Date: Jun 2013
Posts: 427
|
Re: Ydr g29 governor delete
Quote:
Does it set any limit at all or just let the throttle go wide open? |
|
04-21-2018, 12:17 PM | #8 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Ydr g29 governor delete
It's such a stiffer spring ratio, that the governor weights aren't strong enough to "pull" the cable back like stock. Yes there is still a limit.
|
04-21-2018, 01:44 PM | #9 |
Gone Wild
Join Date: Jun 2013
Posts: 427
|
Re: Ydr g29 governor delete
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Robin 350 governor delete ??s | Gas EZGO |