|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-29-2018, 01:22 PM | #1 |
Not Yet Wild
Join Date: Apr 2012
Posts: 19
|
Solenoid Test Results after starting over
So here is what had happened in my recent tests trying to determine if I have a bad solenoid.
1.) Black meter probe left on battery ground post and red meter probe on large solenoid post attached to red cable from battery shows 12.88 volts. 2.) Black probe left on battery ground post and red meter probe then placed on large solenoid post which has cable gong to starter, then Key on and pressed pedal, hear the solenoid click, but NO voltage. 3.) With key off, pedal not pushed, take reading across the 2 large solenoid posts and have 12.88 volts. And of course, in this state, if I jump these 2 large solenoid posts, she starts. Does this mean my solenoid is bad, i.e. has a short, or something? Many thanks for any help. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Motor test results | Electric EZGO | |||
Battery test results | Electric EZGO | |||
Compession test results...cold | Gas EZGO | |||
my battery test results | Extreme DC! |