|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
01-13-2019, 04:00 PM
|
#1 |
|
Gone Wild
 Join Date: Oct 2013
Location: Martinsburg WV
Posts: 281
|
G9 "fuel inlet cover"
How long do these usually last? Every one I see just has no cover. Is it better to just make a custom metal cover with hinges if painting cart? It is obviously a bad design. They are really cheap but that doesnt help if you have a painted cart and have to replace often. I guess my question is.... will a replacement last at least 3 or 4 years or should i just go ahead and do a custom metal one.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-13-2019, 04:47 PM
|
#2 |
|
Not Yet Wild
Join Date: Jun 2013
Posts: 45
|
Re: G9 "fuel inlet cover"
I took mine off to let some heat out during long hill climbs in the summer. Seemed fairly sturdy so I would have thought it would last with normal use.
Sent from my Moto Z2 Play using Tapatalk |
|
|
|
|
01-13-2019, 05:00 PM
|
#3 |
|
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,668
|
Re: G9 "fuel inlet cover"
Should last just fine. If you're worried about it, as you said they are cheap. Buy 2 or 3 and paint them all at the same time so if one breaks, pull it off and put another one on.
The screws that hold them on are always rusted and not worth the hassle. I used cable ties to hole mine on, through the screw holes and it works just fine. |
|
|
|
01-13-2019, 05:01 PM
|
#4 |
|
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,668
|
Re: G9 "fuel inlet cover"
You also have to remember, all the ones you see missin covers are also 25-30 years old.
|
|
|
|
|
01-13-2019, 05:32 PM
|
#5 |
|
Gone Wild
Join Date: Oct 2013
Location: Martinsburg WV
Posts: 281
|
Re: G9 "fuel inlet cover"
CP241. As always my hero.... Best idea there. Buy a few and paint when doing cart. Will do.
Sent from my LG V35 using Tapatalk |
|
|
|
|
01-13-2019, 05:38 PM
|
#6 |
|
Gone Wild
Join Date: Oct 2013
Location: Martinsburg WV
Posts: 281
|
Re: G9 "fuel inlet cover"
Also want to just post a thanks to CP241 and many others. These guys help more than what is seen. Multiple private messages... Just THANK YOU!!!! most just dont see ALL the help that is provided.
Sent from my LG V35 using Tapatalk |
|
|
|
|
01-13-2019, 06:54 PM
|
#7 |
|
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,668
|
Re: G9 "fuel inlet cover"
Were all here to help. Dont think I would have gotten my G9 running to begin with if it weren't for this forum. Or my ezgo workhorse would have been burned to the ground by now if it weren't for certain members here :)
And I have 2 painted covers for mine. Ready to swap :) |
|
|
|
|
01-13-2019, 08:08 PM
|
#8 | |
|
Gone Wild
Join Date: Oct 2016
Location: South of Chicago
Posts: 166
|
Re: G9 "fuel inlet cover"
Quote:
|
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| switching from electric to "stock" fuel pump | Gas Yamaha | |||
| Clutch Cover "Pinging" Under Acceleration | Gas Yamaha | |||
| "Pulse" Fuel Pump Conversion? ('82 DX4) | Gas Harley Davidson | |||
| '83 - Battery cover "popped off" | Gas EZGO | |||
| Do Not Use "flex Fuel" In Golf Carts | Gas golf carts | |||
Linear Mode
