|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-27-2018, 08:37 AM | #11 |
Not Yet Wild
Join Date: Mar 2018
Posts: 11
|
Re: Intro- G9 about to get a 420 swap
So I now have the 420cc predator from HF, ordered the tapered sleeve, motor mount, alt bracket, the bracket for lifted carts and a new exhaust from vegas carts that should all be here today. I am going to start on the build this weekend hopefully.
I need to pull the clutch off tonight. Why do you guys say be careful on the clutch? Maybe I havent read enough on that one yet. I was going to cut the crank shaft down and slide the taper piece on and just reuse my stock one. I am not looking at doing anything to the motor itself to make it faster, I am really just looking for a solid running cart now. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-27-2018, 09:07 AM | #12 | |
Not Yet Wild
Join Date: Mar 2018
Posts: 11
|
Re: Intro- G9 about to get a 420 swap
Quote:
|
|
03-27-2018, 09:21 AM | #13 |
Not Yet Wild
Join Date: Mar 2018
Posts: 11
|
Re: Intro- G9 about to get a 420 swap
|
03-27-2018, 09:49 AM | #14 |
A Gal with a Cart!
Join Date: Aug 2015
Location: Northeast in the Republic of Texas
Posts: 462
|
Re: Intro- G9 about to get a 420 swap
I'm jealous of your first rig and he pipes holding up the roof.
That is totally awesome. I just bought the square aluminum tubing from Home Depot and a $25 ez-go plastic roof so at least have something over my head on my cart. Its a farm thang anyhow. Would you post some more pictures of how that tubing is connected to the body and the roof? Bracing and what not. |
03-27-2018, 09:52 AM | #15 | |
Not Yet Wild
Join Date: Mar 2018
Posts: 11
|
Re: Intro- G9 about to get a 420 swap
Quote:
|
|
04-07-2018, 03:57 PM | #16 |
Not Yet Wild
Join Date: Mar 2018
Posts: 11
|
Re: Intro- G9 about to get a 420 swap
I am trying to get the bolt off the crankshaft, but it is seized on or i am doing something wrong.
I have tried electric and air impact, short cheater bar and it won't budge. This isn't a reverse thread by chance is it? Tried a little transmission oil and acetone mix and let is soak a bit and nothing. Any tips would be appreciated! And ugh, sorry I forgot to snap some pics! |
04-07-2018, 04:31 PM | #17 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Intro- G9 about to get a 420 swap
Bolt through the clutch? That one is definitely regular direction.
|
04-07-2018, 04:44 PM | #18 |
Not Yet Wild
Join Date: Mar 2018
Posts: 11
|
Re: Intro- G9 about to get a 420 swap
|
04-07-2018, 09:17 PM | #19 |
A Gal with a Cart!
Join Date: Aug 2015
Location: Northeast in the Republic of Texas
Posts: 462
|
Re: Intro- G9 about to get a 420 swap
kos -
no problems been too dang cold to do anything this week. my bolt came out with very little effort. JW |