G9 diff housing gasket or no gasket???

Jimme T · 09-09-2018, 11:11 PM

I took this apart to install the new gears. I asked about the gasket and he said there isn’t one. When I split the cases there is a gasket there but I can’t find anyone that lists a gasket for it. Do I just yamabond it back together or do I have to make a new gasket? I really need to get this buttoned back up ASAP so I can move it out of the shop. Any help would be greatly appreciated.

cgtech · 09-10-2018, 12:03 AM

If your axle splits in half (not just a black steel cover), the gasket is very important for correct gear/shaft/bearing clearance.

Jimme T · 09-10-2018, 12:48 AM

That’s what I was afraid of. Any idea where I can get one. I can’t find one online

Jimme T · 09-10-2018, 01:01 AM

I found it. Thanks

cgtech · 09-10-2018, 01:01 AM

Heres the part number,

J38-46319-01-00.

If it's nowhere out there to be found. Get gasket paper from the auto parts store that's as close to the same thickness as the current gasket, and cut your own. A gasket that's just a tiny amount too thick is better than nothing at all (which could cause the bearings to bind up, and fail within hours).

EDIT- I see you found it, great!

Jimme T · 09-10-2018, 08:31 AM

CPP stocks this gasket. It’s on its way

09-09-2018, 11:11 PM	#1
Jimme T Getting Wild Join Date: Aug 2018 Posts: 107	G9 diff housing gasket or no gasket??? I took this apart to install the new gears. I asked about the gasket and he said there isn’t one. When I split the cases there is a gasket there but I can’t find anyone that lists a gasket for it. Do I just yamabond it back together or do I have to make a new gasket? I really need to get this buttoned back up ASAP so I can move it out of the shop. Any help would be greatly appreciated.
Jimme T Getting Wild Join Date: Aug 2018 Posts: 107

09-10-2018, 12:03 AM	#2
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: G9 diff housing gasket or no gasket??? If your axle splits in half (not just a black steel cover), the gasket is very important for correct gear/shaft/bearing clearance.

09-10-2018, 12:48 AM	#3
Jimme T Getting Wild Join Date: Aug 2018 Posts: 107	Re: G9 diff housing gasket or no gasket??? That’s what I was afraid of. Any idea where I can get one. I can’t find one online
Jimme T Getting Wild Join Date: Aug 2018 Posts: 107

09-10-2018, 01:01 AM	#4
Jimme T Getting Wild Join Date: Aug 2018 Posts: 107	Re: G9 diff housing gasket or no gasket??? I found it. Thanks
Jimme T Getting Wild Join Date: Aug 2018 Posts: 107

09-10-2018, 01:01 AM	#5
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: G9 diff housing gasket or no gasket??? Heres the part number, J38-46319-01-00. If it's nowhere out there to be found. Get gasket paper from the auto parts store that's as close to the same thickness as the current gasket, and cut your own. A gasket that's just a tiny amount too thick is better than nothing at all (which could cause the bearings to bind up, and fail within hours). EDIT- I see you found it, great!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

09-10-2018, 08:31 AM	#6
Jimme T Getting Wild Join Date: Aug 2018 Posts: 107	Re: G9 diff housing gasket or no gasket??? CPP stocks this gasket. It’s on its way
Jimme T Getting Wild Join Date: Aug 2018 Posts: 107

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Question g9 diff gasket	Golf Carts and Parts
Diff case gasket?	Electric Club Car
G1 gasket for oil pump housing and for oil pump?	Gas Yamaha
Paper Gasket, No Gasket, Permatex?	Gas EZGO
g1 exh. gasket	Gas Yamaha