![]() |
![]() |
#1 |
Dum Spiro Spero
Join Date: Jan 2008
Location: Moncks Corner, SC
Posts: 732
|
![]() What is everyone doing when you need to replace your floormat? I dont feel like spending $75 and up on some rubber to put my foot on. Does anyone have any cheap tips or DIY's on this?
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,963
|
![]() I have one older cart with carpet. I have seen a rubber floor mat at Lowes big enough for like $45 to cut to fit. And lastly check local feed store to see if they have sheet rubber goods for trailer floors.
I bought some 3/8" x 5' x 12' for $40......Would do a few carts (cuts with a razor knife and a strong arm) I have seen indoor/outdoor carpet on em too ![]() |
![]() |
![]() |
![]() |
#3 |
Dum Spiro Spero
Join Date: Jan 2008
Location: Moncks Corner, SC
Posts: 732
|
![]() Thanks scotty, You have gave me 2 more idea's.
|
![]() |
![]() |
![]() |
#4 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,963
|
![]() Da Nada.
|
![]() |
![]() |
![]() |
#5 |
Admin/Moderator
![]() ![]() Join Date: Dec 2006
Location: Ohio
Posts: 18,135
|
![]() I bought a piece of this stuff. $2.22 sq/ft for solid color and shipping was cheap. That was a couple years ago...http://www.allmats.com/site/439205/page/208946
![]() |
Ron
![]() PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
![]() |
![]() |
![]() |
#6 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,963
|
![]() That looks good and it is way practicle! Purrfect!
![]() |
![]() |
![]() |
![]() |
#7 |
Dum Spiro Spero
Join Date: Jan 2008
Location: Moncks Corner, SC
Posts: 732
|
![]() Wow, Thats not bad at all. Thank you newguy. I seen where you posted that on another site but didnt post the link. I do appreciate this also.
Has it held up great over the years? |
![]() |
![]() |
![]() |
#8 |
Admin/Moderator
![]() ![]() Join Date: Dec 2006
Location: Ohio
Posts: 18,135
|
![]() |
Ron
![]() PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
![]() |
![]() |
![]() |
#9 |
Dum Spiro Spero
Join Date: Jan 2008
Location: Moncks Corner, SC
Posts: 732
|
![]() Cool deal. Did you use rivots for holding it down?
|
![]() |
![]() |
![]() |
#10 | |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,963
|
![]() Quote:
![]() You can post links to stuff bu doesn't sell.........that is why we are all here!!! ![]() |
|
![]() |
![]() |