|
|
|||||||
| Ezgo Gas Tech Resource info, wiring diagrams and how to's for Gas powered EZGO golf carts |
|
|
Thread Tools | Display Modes |
11-10-2008, 09:29 AM
|
#1 |
|
Not your usual outlaw
 Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,047
|
Electric Lift for Workhorse dump bed
Don’t know if this is worthy of a sticky?
Electric lift for workhorse dump bed components that will seamlessly fit factory mounts. Warner Electric liner actuator# K2xG20 (2200 lb cap, 6” throw) You can use any that is 14” to 15” closed dimension. Napa switch# TG7071 (Momentary on /off/ momentary on 6 pole) Napa 30amp breaker# 782-3105 1) ½” x 3” clevis pin 1) ½” x 1-7/8 to 2” clevis pin 2) 3/8” spacers (I used 1/2" SAE washers) 3) cotter pins (appropriately sized for clevis pins) Red and black primary wire, I used 14 gauge about 15’ ea. 15’ 1/2” split loom cut to length. cost me ttl $143.00 |
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-10-2008, 12:29 PM
|
#2 |
|
Gone Wild
Join Date: Aug 2007
Location: near sacramento,ca
Posts: 1,893
|
Re: Electric Lift for Workhorse dump bed
Sticky
|
|
|
|
11-10-2008, 03:38 PM
|
#3 |
|
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Electric Lift for Workhorse dump bed
Where did you get the actuator from?
I'll make this a sticky or part of one asap. |
|
|
|
11-10-2008, 04:47 PM
|
#4 |
|
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,047
|
Re: Electric Lift for Workhorse dump bed
Ruredy,
I got mine on e-bay real cheap. You would have to find a Warner distributor to buy them retail. I also think the Northern Tool Item# 125011 will work, I just thought it was kind of cheap looking. |
|
|
|
11-11-2008, 09:35 AM
|
#5 |
|
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,047
|
Re: Electric Lift for Workhorse dump bed
Jon,
This is the Warner page for the actuator. They have a link on top for dealer locator. http://www.warnernet.com/newproducts...gory=actuators |
|
|
|
08-16-2009, 07:04 PM
|
#6 |
|
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,047
|
Re: Martini Time No Subject
Switch wiring for ez-go dump
 |
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| questions about lift, wheels, tires for workhorse st 480 | Gas EZGO | |||
| Heavy duty electric dump kit | Gas EZGO | |||
| Electric lift for dump bed. | Electric EZGO | |||
| electric dump lift | Gas EZGO | |||
| Workhorse Lift? | Gas EZGO | |||
Linear Mode
