|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
02-29-2008, 12:25 PM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2008
Posts: 25
|
help
what are the threads of the puller bolt holes on the outer sheave? im guessing they r metric.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-29-2008, 01:58 PM
|
#2 |
|
Admin
 Join Date: Dec 2006
Location: TN
Posts: 101,639
|
Re: help
They are metric. I can't remember the thread size. I used some that were in a puller kit I had purchased at Auto Zone.
|
|
|
|
|
|
|
02-29-2008, 10:13 PM
|
#3 |
|
Gone Wild
Join Date: Dec 2007
Location: lake county FL
Posts: 327
|
Re: help
i think that they are a 6/100th fine thread because they arent a 10 or a 12 or a 1/4 20 or 28... i just did this but i cant exactly remember. i had to go back to the hardware store 5 times.
 i do know foresure that the 4 bolts that hold the front seat hinge down are an exact fit so take one of those with you to the hardware store... hope this helps |
|
|
|
|
03-01-2008, 04:22 AM
|
#4 |
|
Not Yet Wild
Join Date: Feb 2008
Posts: 25
|
Re: help
u r exactly right HWM they r 6mm.thanks guys for the help.
|
|
|
|
|
03-01-2008, 08:17 PM
|
#5 |
|
Gone Wild
Join Date: Dec 2007
Location: lake county FL
Posts: 327
|
Re: help
Glad i could help badjohnny
|
|
|
|
Linear Mode
