Duffer,Are you out there?

aka rotten · 03-02-2008, 04:18 PM

Duffer i,m still havin problems trying to install brake lights,mabee you or someone can tell me where i went astray!Mounted switch tp pedal no problem there,harness instructions state to hook up switch with 2 ends from harness,next step wire from harness with fuse link say to install on 12 volt sorce,i hooked it directly to battery,only 2 wires left to hook up and directions state to hook tored wire comming from taillight,1st thing i noticed was brake lights work on marker lights in bulb kinda dull but liveable,then i noticed when i turn signal on all 4 blink!did replace flasher with heavy duty one thinken that would help but notta,is tail ligts supposed to have 2 bulbs in them? and buld is 2 filiment 2057 it says,lights do have 3 wires comming from them.what short of taking whole setup out and forgettin it would ya,ll recomend?Thanks in advance again.

duffer · 03-02-2008, 10:17 PM

Rotten
You have just moved past my field of expertise. I do know that the taillight bulb should be a 2057 that has 2 filaments. That bulb will handle taillights, dir. lights and brake lights. Someone else will have to help you through the wiring hookup. I can't trace my wires without taking the cart apart. Don't give up, you are closer than you think.

03-02-2008, 04:18 PM	#1
aka rotten Not Yet Wild Join Date: Dec 2007 Posts: 68	Duffer,Are you out there? Duffer i,m still havin problems trying to install brake lights,mabee you or someone can tell me where i went astray!Mounted switch tp pedal no problem there,harness instructions state to hook up switch with 2 ends from harness,next step wire from harness with fuse link say to install on 12 volt sorce,i hooked it directly to battery,only 2 wires left to hook up and directions state to hook tored wire comming from taillight,1st thing i noticed was brake lights work on marker lights in bulb kinda dull but liveable,then i noticed when i turn signal on all 4 blink!did replace flasher with heavy duty one thinken that would help but notta,is tail ligts supposed to have 2 bulbs in them? and buld is 2 filiment 2057 it says,lights do have 3 wires comming from them.what short of taking whole setup out and forgettin it would ya,ll recomend?Thanks in advance again.
aka rotten Not Yet Wild Join Date: Dec 2007 Posts: 68

03-02-2008, 10:17 PM	#2
duffer Not Yet Wild Join Date: Jan 2008 Location: The Villages, Fl Posts: 20	Re: Duffer,Are you out there? Rotten You have just moved past my field of expertise. I do know that the taillight bulb should be a 2057 that has 2 filaments. That bulb will handle taillights, dir. lights and brake lights. Someone else will have to help you through the wiring hookup. I can't trace my wires without taking the cart apart. Don't give up, you are closer than you think.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum