|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-19-2016, 03:51 PM | #1 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
G8 only runs when big posts are jumped
Any idea what this would diagnose? G8 runs when I jump the two large posts on the solenoid.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-19-2016, 04:07 PM | #2 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,283
|
Re: G8 only runs when big posts are jumped
Either the solenoid itself has failed, or the solenoid activation circuit has failed. Was the solenoid clicking before you jumped it? If it was this would indicate that the solenoid itself is bad because the circuit that activates it is doing it's job.
|
03-19-2016, 04:59 PM | #3 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: G8 only runs when big posts are jumped
Nice Gman, now you fix Yamaha's too? By the way, what do you need a stationarly band saw in the printing business for?
|
03-19-2016, 05:26 PM | #4 | |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,283
|
Re: G8 only runs when big posts are jumped
Quote:
And, I've been out of printing for over six years now. Working with my hands and brain now fixing broken stuff for my employer. And they break a lot of stuff! |
|
03-19-2016, 07:43 PM | #5 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
Re: G8 only runs when big posts are jumped
Solenoid was not clicking before jumping. What step to check the activation circuit. Not even sure where that is.
|
03-19-2016, 07:43 PM | #6 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
Re: G8 only runs when big posts are jumped
Would it hurt anything to leave it jumped?
|
03-19-2016, 10:12 PM | #7 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G8 only runs when big posts are jumped
Check the 2 little diode boxes next to the controller. Also, does yours have white button on charge port. Both common for "no-run" on yamaha of that era.
|
03-20-2016, 07:24 PM | #8 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
Re: G8 only runs when big posts are jumped
looks like one diode box is missing. That's probably my issue?
|
03-20-2016, 07:43 PM | #9 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G8 only runs when big posts are jumped
Thats a starting point. Is it gone like removed or corroded until it fell off?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Mcor 3 jumped can IJust run without it ? | Electric Club Car | |||
83 2pg starts when jumped but not otherwise | Gas EZGO | |||
E-Z GO will only start while being jumped. | Gas EZGO | |||
1990 EZ GO will only start when being jumped | Gas Yamaha | |||
jumped solenoid runs fine | Electric EZGO |