lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Lifted Golf Carts
Lifted Golf Carts Off-Road Golf Carts.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 11-19-2016, 01:38 AM   #1
knwilson
Not Yet Wild
E-Z-GO
 
Join Date: Oct 2016
Posts: 38
Default Another day, another problem - ISO Mount

Well, my HD springs arrived today so I thought I would install them real quick this evening... Once I got the cart up and wheel off, I noticed the following "lift" installed. (see attached images)

Is this just a flipped ISO mount with a 2" piece of steal tubbing? Is there something better I can use?

After getting the old springs off and starting to line up the new ones, I then noticed the ISO mount bushing was shot and completely fell apart. With time running out, I figured I would finish this side and deal getting a new bushing later.

After fighting to line things up for over an hour due to the steal tube lift, I finally got all the bolts back in the ISO mount and started to snug them up when one broke...

Gave up for the night and left if with 3 bolts so I could get it put away and get some more parts ordered. Can anyone explain what the steal tube lift is all about and if it is ok to leave that in place? I am going to order new ISO mounts and bushings for both sides now, but wanted to check if there was something better to get to also replace the tubing.

Thanks again all. Definitely learning a lot about the cart, but having a blast doing it. Just wish my money tree would start producing.
Attached Images
File Type: jpg IMG_5950.jpg (131.4 KB, 0 views)
File Type: jpg IMG_5949.jpg (140.7 KB, 0 views)
File Type: jpg IMG_5948.jpg (125.0 KB, 0 views)

Last edited by knwilson; 11-19-2016 at 01:43 AM.. Reason: Removed question. I figured out.
knwilson is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 11-19-2016, 07:20 AM   #2
StoveBolt
Gone Wild
 
StoveBolt's Avatar
 
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
Default Re: Another day, another problem - ISO Mount

There is another way by using U bolts but you will need the bolts and a couple parts that go on top the axle.

Here's a picture of the parts, it's a spindle lift but you will get the idea.

http://www.allsportsliftkits.com/upl...5/ASM-E6SG.jpg

All Sports might sell you the parts... maybe.
StoveBolt is offline   Reply With Quote
Old 11-19-2016, 02:10 PM   #3
knwilson
Not Yet Wild
E-Z-GO
 
Join Date: Oct 2016
Posts: 38
Default Re: Another day, another problem - ISO Mount

Quote:
Originally Posted by StoveBolt View Post
There is another way by using U bolts but you will need the bolts and a couple parts that go on top the axle.

Here's a picture of the parts, it's a spindle lift but you will get the idea.

http://www.allsportsliftkits.com/upl...5/ASM-E6SG.jpg

All Sports might sell you the parts... maybe.
I also found the following as well. Appears to be similar in cost as replacing the ISO mount and bushings so I may just go this route:

Lift Kit for EZGO TXT - Gas - 4" Economy (1994-2001.5)



I am assuming this eliminates the need for the ISO mount and will work with the HD springs I am adding as well?

Thanks again!
knwilson is offline   Reply With Quote
Old 11-19-2016, 04:15 PM   #4
StoveBolt
Gone Wild
 
StoveBolt's Avatar
 
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
Default Re: Another day, another problem - ISO Mount

You assumed wrong, the 2 parts on top (in picture) is for a cart that has the spring plates
welded on the bottom of the axle, used to move the springs above the axle.

In the picture they are upside down.
StoveBolt is offline   Reply With Quote
Old 11-19-2016, 05:51 PM   #5
knwilson
Not Yet Wild
E-Z-GO
 
Join Date: Oct 2016
Posts: 38
Default Re: Another day, another problem - ISO Mount

Quote:
Originally Posted by StoveBolt View Post
You assumed wrong, the 2 parts on top (in picture) is for a cart that has the spring plates
welded on the bottom of the axle, used to move the springs above the axle.

In the picture they are upside down.
So either way, I still need to get new ISO mounts and bushings?

Also, is my cart not a 2000 TXT then? It doesn't have the welded on plates which it appears all 94-2000 models do? I am so confused now...
knwilson is offline   Reply With Quote
Old 11-19-2016, 08:16 PM   #6
StoveBolt
Gone Wild
 
StoveBolt's Avatar
 
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
Default Re: Another day, another problem - ISO Mount

All gas txt models had iso mounts that I know of, electric models had the welded on plates,
I think the vendor is confused.

At any rate buy the iso mounts or read post 2 again.
StoveBolt is offline   Reply With Quote
Old 11-19-2016, 08:45 PM   #7
knwilson
Not Yet Wild
E-Z-GO
 
Join Date: Oct 2016
Posts: 38
Default Re: Another day, another problem - ISO Mount

Quote:
Originally Posted by StoveBolt View Post
All gas txt models had iso mounts that I know of, electric models had the welded on plates,
I think the vendor is confused.

At any rate buy the iso mounts or read post 2 again.
That makes sense. Thanks for clearing that up for me and all the advice!

Enjoy the rest of your weekend.
knwilson is offline   Reply With Quote
Old 11-19-2016, 08:56 PM   #8
StoveBolt
Gone Wild
 
StoveBolt's Avatar
 
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
Default Re: Another day, another problem - ISO Mount

StoveBolt is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Lifted Golf Carts


Thread Tools
Display Modes


Similar Threads
Thread Forum
Broken Heatsink Mount - Problem? On Road Golf Carts!
Where to mount speakers? Electric Club Car
WTB: EZGO Txt seat back mount/bag mount Golf Carts and Parts
motor mount Big Block Talk!
Where does it mount, Controller and OBC Electric Club Car


All times are GMT -5. The time now is 04:03 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.