06 club car ds No power to starter

[Justintroy]

Well, I knew I'd be back for a more serious question than "how big is my lift". Lol
I got my new solenoid put on today. I installed it to the cart and I'm getting nothing. I thought maybe it was backwards so I pulled it off and flipped it around. Same thing, nothing. I did what you told me on the first solenoid Lockman1. Tapped the solenoid with the peddle pressed and it would *click click click* it would work a couple of peddle presses and then shut back down. After a few times of that I could not get it to click over again. I put on the new solenoid and I dont get anything. Tapping it or not, Nothing. The solenoid is hooked up with the right wires in the right spots. I took a picture before I pulled the old one. So as long as the old one was correct then this one should be also. It's a 30 dollar solenoid from an eBay golf cart dealer. The solenoid is a unipoint brand with the letters and numbers of "SNLS-180M" possible that thus solenoid is bad? What exactly tells the solenoid "fire now"? I'm pretty sure I'm getting that signal off of the micro switch. So I'm stumped again.. lol

[lockman1]

22" tires with a good amount wheel well in front (3" between the tire and body) is probably a 6" lift!

[Justintroy]

Okay, I'm definitely bumping up to an 8" then. I want more ride height than my brother in laws ezgo. Lol
Did you see my last post? It looks like we posted around the same time as each other. I posted right above your response on my lift. Its about my solenoid issue. Any ideas? Thanks Lockman!

[lockman1]

Sorry... I got involved with a different part of the forum...

That part number doesn't look right from what little I've searched!
as long as it's a continuous duty, 12 volt solenoid... it should be okay!
However... your old one clicks, and the new one doesn't, might be of concern!
BUT... I've seen many times where the aftermarket stuff comes "bad" right out of the box!