|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-26-2016, 06:01 PM | #1 |
Not Yet Wild
Join Date: Dec 2015
Location: Corpus Christi, TX
Posts: 28
|
4 pin harness not in controller
Hey everyone, I was underneath the cart today pulling some information off the motor/controller when I noticed there was a 4 pin harness not connected to the controller. Does anybody know what this is for? Whether or not it should be plugged back in?
For reference I have a 2012 club car precedent (6- 8V bats) serial number starts with PH. I have stock Curtis controller and stock ADC motor. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-26-2016, 06:05 PM | #2 |
DS Drivers Club Founder
Join Date: Jul 2013
Location: Upstate NY
Posts: 3,428
|
Re: 4 pin harness not in controller
That is the plug for the diagnostic port up front. It plugs back in right on the controller
|
02-26-2016, 06:15 PM | #3 |
Not Yet Wild
Join Date: Dec 2015
Location: Corpus Christi, TX
Posts: 28
|
Re: 4 pin harness not in controller
Ok thank you. So I'm not missing anything by not having it plugged in. Just need to make sure it does get plugged in before anyone ever hooks up to the diagnostic port.
|
02-26-2016, 10:01 PM | #4 |
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: 4 pin harness not in controller
correct
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
WTB...club car IQ motor, controller and wiring harness | Golf Carts and Parts | |||
What is this harness for? | Electric Club Car | |||
2005 Club Car IQ Motor, Wire Harness, & Controller | Golf Carts and Parts | |||
WTB: Ez Go PDS Run/Tow Harness | Golf Carts and Parts | |||
g22 main harness fuse (near controller) | Electric Yamaha |