DS Custom Dash Cover

[Aflyer]

I have a new dash cover coming, the one with 4 cup holders, two for coffee, and two for Ice Tea, LOL

Do you guys ditch the stock DS dash panel when you install the new ones? The only purpose I see it will serve is holding the reverse buzzer?

Thank you,
Aflyer

yeppers ... i junk them
buzzer can be attached (taped) inside new dash

good luck getting the steering wheel off
keep kids away from your cussing
http://www.buggiesgonewild.com/gas-c...val-video.html
http://www.buggiesgonewild.com/elect...oval-pita.html
http://www.buggiesgonewild.com/elect...l-removal.html
http://www.buggiesgonewild.com/elect...ub-car-ds.html
http://www.buggiesgonewild.com/elect...ing-wheel.html
http://www.buggiesgonewild.com/elect...l-removal.html
http://www.buggiesgonewild.com/desig...de-puller.html

[Kashmir]

Take it off but keep it!
I know three people right now that want one!
Seems people start putting switches or battery gauges in them, then they need to be replaced and they get something different and leave big gaping holes!

[Aflyer]

Thank you both, I couldn't see any reason to leave it there.

And then I remembered the only stupid question is the one not asked. So it was off to the forum to get educated.

And the steering wheel is already off, a couple whacks with the dead blow hammer, and it was off!!

Aflyer

[dundeebarnbuggy]

Mine came with the cart. LOVE it. Not so far to reach the switches, [major plus when wearing winter gear], and gives room behind for fuse block, bus bar, and switch wiring. Probably the driest place on the cart, after I plugged the drain holes on the cup holders. Still working on closing up the hole around the steering column. Glove boxes are fairly dry too.