New Altrax Controller on a G22 and having Runaway problems

Sergio · 05-24-2017, 04:00 PM

Quote:

Originally Posted by CustomGolfCartGuy

but the throttle on and off light clicks on when you hit the throttle in the alltrax toolkit. it knows when the throttle is on it just isnt registering a percentage.

The "foot switch input" and the throttle are completely different circuits.

CustomGolfCartGuy · 05-25-2017, 09:52 AM

Quote:

Originally Posted by Sergio

The "foot switch input" and the throttle are completely different circuits.

So do I have a bad throttle? What part would that be if it's not the pedal switch?

Sergio · 05-25-2017, 10:48 AM

It depends on what kind of throttle device you have:

If it is a 0-5kΩ, it is staying at 0Ω
If it is a 5k-0Ω, it is staying at 5kΩ
If it is a 0-5v, it is staying at 0v
If it is an ITS, it is staying at the lowest current.

What kind do you have and is the Controller setup to the same type?

Did You clear any previous throttle calibration?

Did you change any curves for Linearization or Speed?

CustomGolfCartGuy · 05-26-2017, 09:40 AM

the carts is setup 0-5k and the controller is setup the same, i have tried severl different setups and im having no luck. i didnt clear any throttle calibration that i know of. no i havent messed with the curves either.

georgia088 · 04-23-2019, 03:30 AM

Was there a solution to this?
Thanks!

05-25-2017, 10:48 AM	#23
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 9,329	Re: New Altrax Controller on a G22 and having Runaway problems It depends on what kind of throttle device you have: If it is a 0-5kΩ, it is staying at 0Ω If it is a 5k-0Ω, it is staying at 5kΩ If it is a 0-5v, it is staying at 0v If it is an ITS, it is staying at the lowest current. What kind do you have and is the Controller setup to the same type? Did You clear any previous throttle calibration? Did you change any curves for Linearization or Speed?

05-26-2017, 09:40 AM	#24
CustomGolfCartGuy Gone Wild Join Date: Sep 2016 Posts: 375	Re: New Altrax Controller on a G22 and having Runaway problems the carts is setup 0-5k and the controller is setup the same, i have tried severl different setups and im having no luck. i didnt clear any throttle calibration that i know of. no i havent messed with the curves either.

04-23-2019, 03:30 AM	#25
georgia088 Gone Wild Join Date: Jul 2012 Posts: 527	Re: New Altrax Controller on a G22 and having Runaway problems Was there a solution to this? Thanks!
georgia088 Gone Wild Join Date: Jul 2012 Posts: 527

Similar Threads
Thread	Forum
Altrax XCT Controller	Electric EZGO
Altrax SPM500 controller map	Electric Club Car
EZGO DCS Altrax Controller, PQ Motor	Golf Carts and Parts
instaling an altrax controller	Electric Club Car
Altrax Controller Recommendations	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum