|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-22-2019, 07:26 PM | #1 |
Not Yet Wild
Join Date: Sep 2018
Posts: 6
|
Yamaha G16 Controller install help!!
Hey guys, having problems installing an Alltrax SR48400 in a G16. I installed everything according to the diagram except for adding an additional black wire from the solenoid black to the controller. Was told by Alltrax support that wire did not have to be installed on my model when I had a few questions for them earlier. Issue is no light on controller in forward and cart will not move. In reverse I have lights on controller and when pressing the pedal down it does not move, but when I release pedal from floor it starts to move in reverse. Any help would be greatly appreciated. Thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2019, 08:26 PM | #2 |
Not Yet Wild
Join Date: Sep 2018
Posts: 6
|
Re: Yamaha G16 Controller install help!!
Finally was able to find the problem after a quick call to Alltrax. Apparently on some G16 carts from the factory Yamaha did not wire up the same so a quick swap of the blue and green wires resolved my issue!!!
|
03-26-2019, 12:37 AM | #3 |
Not Yet Wild
Join Date: Feb 2019
Location: Woodburn Or
Posts: 9
|
Re: Yamaha G16 Controller install help!!
how about a pic of your problem and fix
|
|
|
Similar Threads | ||||
Thread | Forum | |||
xct controller install ?? | Electric Club Car | |||
Where did you install your controller? | Electric Club Car | |||
Install 400-500 controller? | Electric Club Car | |||
05 txt pds controller install | Electric EZGO | |||
Controller Install | Electric EZGO |