|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-27-2020, 02:24 PM | #1 |
Gone Wild
Join Date: Dec 2006
Location: Pittsburgh, PA
Posts: 371
|
Carb re jet
Does anyone remember the specs of what the G2/G9 carb main jet needs drilled to when running cone style air filter and aftermarket muffler?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-28-2020, 12:56 AM | #2 |
Not Yet Wild
Join Date: Jun 2014
Posts: 2
|
Re: Carb re jet
I'm running a 6 inch dual stage Unifilter and a Plowman's pipe. I purchased a selection of small round Mikuni main jets from Jet's R Us. #125 130 135 140. I'm currently running the #135. As far as drill size goes you would be in the neighborhood of .046 to .048 for #130 and #135. I have a 1988 G2.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
carb tuning mikuni or eBay CV carb | Clone Engine Swaps | |||
Carb rebuild kit for 97 Mikuni carb. | Gas Columbia ParCar | |||
1989 Ezgo New Carb leaking gas like the old Carb | Gas EZGO | |||
cheap carb swap onto 3PG engine- Tecumseh carb works great- with lots of pics | Gas EZGO | |||
91 2 Cycle Carb Missing Carb Screw | Gas EZGO |