|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-31-2010, 06:37 PM | #1 |
Not Yet Wild
Join Date: Jan 2010
Location: lake city,fl
Posts: 65
|
1997 g16 lift kit
i was wondering if my cart will clear 23 inch tires with a 6 inch jakes lift lookin at some 23-10-14 and dont want to buy if they wont fit
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-31-2010, 07:07 PM | #2 |
Not Yet Wild
Join Date: Nov 2009
Posts: 49
|
Re: 1997 g16 lift kit
you would need to buy wheel spacers and then they would clear just fine
|
01-31-2010, 08:21 PM | #3 |
Not Yet Wild
Join Date: Jan 2010
Location: lake city,fl
Posts: 65
|
Re: 1997 g16 lift kit
why would i need wheel spacers arent the aftermarket wheels offset enough?
|
01-31-2010, 08:27 PM | #4 |
Not Yet Wild
Join Date: Nov 2009
Posts: 49
|
Re: 1997 g16 lift kit
offset enough to fit 22's you could try without the spacers they might fit idk never done just what ive read in other threads
|
01-31-2010, 08:32 PM | #5 |
Not Yet Wild
Join Date: Jan 2010
Location: lake city,fl
Posts: 65
|
Re: 1997 g16 lift kit
10 4 appreciate it ,i was thinkin that as long as the width is the same on both the 22s or 23s the height wouldnt matter but im new to the cart world
|
01-31-2010, 11:41 PM | #6 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: 1997 g16 lift kit
The 23" is fine, it's the 10" wide that might be a concern. Talk to Mike at "Mikes motor toys"! He's good on this kind a stuff.
|
02-01-2010, 01:20 AM | #7 |
Getting Wild
Join Date: Jan 2010
Location: Connectict
Posts: 142
|
Re: 1997 g16 lift kit
23" tires will work just fine with a 6" lift kit as long as the rims are offset, the kits you buy from cart dealers today are made to work fine..
the only issue to be concerned about is if you have a rear seat or cargo box, if you do, you will want to use HD springs so you don't bottom out with a heavy load if you drive on rough surface |
02-02-2010, 07:13 AM | #8 |
Gone Wild
Join Date: Nov 2007
Posts: 469
|
Re: 1997 g16 lift kit
they are ok unless you get the chrome side rocker panel
they need to be installed ofset to the back , when you turn full steering they is a bit of rubing |
|
|
Similar Threads | ||||
Thread | Forum | |||
1997 Txt | Extreme DC! | |||
1997 DCS value | Electric EZGO | |||
1997 48V won't run | Electric Club Car | |||
1997 dcs | Electric EZGO | |||
1997 Ezgo Dcs | Golf Carts and Parts |