|
03-06-2010, 07:25 AM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2010
Location: Canada, Port Colborne
Posts: 25
|
No Reverse
I have a 2002 48 volt club car, worked fine, decided to upgrade all of wires to 4G. Did one wire at a time. Cart will go forward but when I put it in reverse the solenoid clicks wheels try to start solenoid clicks again and nothing. Any help would be appreciated.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-06-2010, 08:50 AM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: No Reverse
One wire at a time means there is no way you have something connected wrong ....... are u sure all of the connections are good? Double checked?
|
|
|
|
|
03-06-2010, 12:31 PM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2010
Location: Canada, Port Colborne
Posts: 25
|
Re: No Reverse
I thought I would have no issues by replacing one wire at a time. I just can't figure this one out. I have it on jacks and when I place it in the fwd direction solenoid clicks and the wheels turn perfect. When I plave it in reverse the buzzer sounds the solenoid clicks the wheels just start to turn, the solenoid clicks and nothing. Everytime I try it same thing sometimes the wheels will turn about a 1/4 turn before the solenoid clicks and everything stops.
 |
|
|
|
|
03-06-2010, 12:51 PM
|
#4 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: No Reverse
If it worked before you started working on it then you did something to make it not work? Have you printed out the wiring diagram for your cart from the stickies at the beginning of this section?
|
|
|
|
|
03-06-2010, 01:26 PM
|
#5 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: No Reverse
Try slamming the F&R lever back and forth a few times? NO lever? Snap the toggle F&R hard a few times..... Sounds like the controller is not getting the signal to fire up and all you are getting is the controller discharge power bleeding off when you put it in reverse...
|
|
|
|
|
03-06-2010, 01:33 PM
|
#6 |
|
Not Yet Wild
Join Date: Mar 2010
Location: Canada, Port Colborne
Posts: 25
|
Re: No Reverse
I don't seem to be able to find the proper wiring diagram; my cart is a 2002 regen IQ.
|
|
|
|
|
03-06-2010, 01:36 PM
|
#7 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: No Reverse
1 solenoid or 2?
|
|
|
|
|
03-06-2010, 01:41 PM
|
#8 |
|
Not Yet Wild
Join Date: Mar 2010
Location: Canada, Port Colborne
Posts: 25
|
Re: No Reverse
1 solenoid, what I don't understand is the solenid clicks when I put it in reverse and press the pedal and imediately clicks again like it is clicking off, because when it is in fwd it clicks and only clicks again when I take my foot of the pedal.
|
|
|
|
|
03-06-2010, 01:43 PM
|
#9 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: No Reverse
click this link it will take you to the top of the CC electric section where you started this thread.... right on top of the page in red are the Stickies and the very top one say 99-2002 CC regen wiring diagram
 http://www.buggiesgonewild.com/electric-club-car/ |
|
|
|
|
03-06-2010, 01:45 PM
|
#10 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: No Reverse
It sounds like you are finding the problem area......
|
|
|
|
 |
| Tags |
| electrical system diagram, reverse problem, solenoid |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| wiring a reverse light to the reverse buzzer? | Gas Yamaha | |||
| Will not go into Reverse | Gas Club Car | |||
| Reverse | Electric Club Car | |||
| 85 gas no reverse | Gas Club Car | |||
| no go in reverse | Gas Yamaha | |||
Linear Mode
